Map Properties

Enables you to control accessibility behavior and alternative text for the widget.

For more information on using accessibility features in your app, refer the Accessibility appendix in the Quantum Application Design Guidelines Guide.

Syntax

accessibilityConfig

Type

JSON Object

Read/Write

Read + Write

Remarks

• The accessibilityConfig property is enabled for all the widgets which are supported under the Flex Layout.

NOTE: From Quantum Visualizer V9 SP2 GA version, you can provide i18n keys as values to all the attributes used inside the accessibilityConfig property. Values provided in the i18n keys take precedence over values provided in a11yLabel, a11yValue, and a11yHint fields.

The accessibilityConfig property is a JavaScript object which can contain the following key-value pairs.

Accessibility in Components

• In a FlexForm containing direct widgets and components, while providing values to the aria-labelledby and the aria-describedby properties for widgets directly inside the FlexForm, you must not provide the Id of the widgets inside the components.
• In a component containing direct widgets and child components, while providing values to the aria-labelledby and the aria-describedby properties for widgets directly inside the component, you must not provide the Id of the widgets inside the child components.

Android limitations

• If the results of the concatenation of a11y fields result in an empty string, then accessibilityConfig is ignored and the text that is on widget is read out.
• The soft keypad does not gain accessibility focus during the right/left swipe gesture when the keypad appears.
• The i18n key support in accessibilityConfig property depends on the languages supported by the TTS(Text-To-Speech) engine of the mobile device. If the TTS engine of the mobile device does not support a language, the text provided in the accessibilityConfig property is not read by the TTS engine.

Accessibility in Desktop Web Platform

• To use the accessibilityConfig property on the Desktop Web platform, ensure that you disable the Legacy JS Mode in the Project Settings > Responsive Web section.
• When accessibilityConfig property is configured for any widget, the tabIndex attribute is added automatically to the accessibilityConfig property.
• The behavior of accessibility depends on the Web browser, Web browser version, Voice Over Assistant, and Voice Over Assistant version.
• Currently Desktop web applications support only a few ARIA tags. To achieve more accessibility features, use the attribute a11yARIA. The tags added to a11yARIA will be added to the DOM.

• The tagName attribute supports the following tags in the Label Segment, FlexContainer, and FlexScrollContainer widgets:

  Widget Name	Supported tags	Example	Remarks
  Label	label(default) div span h1, h2, h3, h4, h5, h6	The following example shows how to assign the tags to the Label widget. /*Sample code to assign the span tag to the Label widget*/ "accessibilityConfig": { "tagName": "span" }
  Segment	ul(default) ol div table dl	The following example uses the role and tagName attributes to modify the HTML tag of Segment widget. /*Sample code to assign the div tag to the Segment widget*/ "accessibilityConfig": { "a11yARIA": { "role": "grid" }, "tagName": "div" }	You can assign values to the role attribute inside the a11yARIA only when you modify the tag to div. You can only assign the following values to the role attribute of a Segment widget: grid table and button.
  FlexContainer	div (default) th td tr dt dd	The following example uses the role and tagName attributes to modify the HTML tag of a FlexContainer widget. /*Sample code to assign the td tag to a FlexContainer widget*/ var flx = new kony.ui.FlexContainer({ "accessibilityConfig": { "tagName": "td" } });	This is a read-only property. When you specify the value as tr for the tagName property of a FlexContainer widget, ensure that you use the Flex Horizontal Layout Type. The height of the FlexContainer widget is inherited from the height of the child widgets present inside it.
  FlexScrollContainer	div (default) th td dt dd	The following example uses the role and tagName attributes to modify the HTML tag of a FlexScrollContainer widget. /*Sample code to assign the td tag to a FlexScrollContainer widget*/ var flx = new kony.ui.FlexScrollContainer({ "accessibilityConfig": { "tagName": "td" } });	This is a read-only property.

Example 1

This example uses the Login scenario to explain how to provide accessibility to the usernameText TextBox widget inside the frmLogin Form. The frmLogin form also contains the usernameLbl Label widget (with the text Username) and rulesLbl Label widget(that contains the username policies).

//This is a generic property that is applicable for various widgets.
/*Here, we have shown how to use the accessibilityConfig Property for a TextBox widget.You need to make a corresponding use of the accessibilityConfig property for other applicable widgets.*/
frmLogin.usernameText.accessibilityConfig = {
  "a11yLabel": "Label",
  "a11yValue": "Value",
  "a11yHint": "Hint",
  "a11yARIA": {
    "tabindex" /* Integer with no floating/decimal numbers*/: 1,
    "role" /*Prescribed string value as per wcag guidelines*/: "main",
    "aria-labelledby": "usernameLbl"
    "aria-describedby": "rulesLbl"
  }
};

Example 2

This example creates a Label widget (lblSpan) inside the frmSample FlexForm. This sample code uses the tagName property to change the HTML tag of the lblSpan Label from label tag to span tag.

/*Here, we have shown how to use the accessibilityConfig Property for a Label widget. You need to make a corresponding use of the accessibilityConfig property for in Segment widget as well.*/
var lblspan = new kony.ui.Label({
  "accessibilityConfig": {
    "tagName": "span"
  },
  "id": "lblspan",
  "isVisible": true,
  "left": "460dp",
  "skin": "CopyslLabel0b3521e51e03b44",
  "text": "span tag",
  "top": "92dp",
  "width": kony.flex.USE_PREFFERED_SIZE,
  "zIndex": 1
}, {
  "contentAlignment": constants.CONTENT_ALIGN_MIDDLE_LEFT,
  "padding": [0, 0, 0, 0],
  "paddingInPixel": false
}, {});

frmSample.add(lblspan);

Example 3

This example uses the button widget to implement internationalization in accessibilityConfig property, but the principle remains the same for all widgets.

/*Sample code to implement internationalization in accessibilityConfig property in Native platform.*/

Form1.myButton.accessibilityConfig = {
    "a11yLabel": kony.i18n.getLocalizedString("key1")     
};
/*Sample code to implement internationalization in accessibilityConfig property in Desktop Web platform.*/

Form1.myButton.accessibilityConfig = {
    "a11yLabel": "kony.i18n.getLocalizedString(\"key3\")"
};

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Enables you to navigate to the specified address.

Syntax

address

Type

JSObject

Read/Write

Read + Write

Remarks

This is a non-constructor property. You cannot set the property through a widget constructor. But you can read and write data to it.

Example

//Sample code to set the address property of a Map widget.

frmMap.myMap.address = {
    "location": "test, test"
};

Platform Availability

• Android

Specifies the anchor position of a map's pin image.

Syntax

anchor

Type

Number

Read/Write

Read + Write

Remarks

The anchor property is an optional property that your app can set to one of the Pin Image Anchor Constants defined in the kony.map namespace. Refer to Visualizer API Guide.

Platform Availability

• Available in the IDE
• Available on all platforms

Specifies the anchor point of the widget bounds rectangle using the widget's coordinate space.

Syntax

anchorPoint

Type

JSObject

Read/Write

Read + Write

Remarks

• The value for this property is a JavaScript dictionary object with the keys "x" and "y". The values for the "x" and "y" keys are floating-point numbers ranging from 0 to 1. All geometric manipulations to the widget occur about the specified point. For example, applying a rotation transform to a widget with the default anchor point causes the widget to rotate around its center.
• The default value for this property is center ( {"x":0.5, "y":0.5} ), that represents the center of the widgets bounds rectangle. The behavior is undefined if the values are outside the range zero (0) to one (1).

Example

Form1.widget1.anchorPoint = {
    "x": 0.5,
    "y": 0.5
};

Platform Availability

• iOS
• Android

This property helps you to control the placement of the pins of the Map widget to the center, when it is clicked.

Syntax

autoCenterPinOnClick

Type

Boolean

Read/Write

Read + Write

Remarks

The default value of the autoCenterPinOnClick Property is false in all platforms, except for Android.

NOTE: For 3D maps in iOS, if autoCenterPinOnClick Property is false and the custom callout is clipped to the borders, the map gets re-centered.

Example

//Sample code to enable the autoCenterPinOnClick property of a Map widget.

frmMap.myMap.autoCenterPinOnClick=true;

Platform Availability

• Android
• Desktop Web

This property determines the bottom edge of the widget and is measured from the bottom bounds of the parent container.

The bottom property determines the position of the bottom edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the bottom edge of the parent container. In flow-vertical layout, the value is ignored. In flow-horizontal layout, the value is ignored.

The bottom property is used only if the Height property is not provided.

Syntax

bottom

Type

String

Read/Write

Read + Write

Remarks

• The property determines the bottom edge of the widget and is measured from the bottom bounds of the parent container.
• If the layoutType is set as kony.flex.FLOW_VERTICAL, the bottom property is measured from the top edge of bottom sibling widget. The vertical space between two widgets is measured from bottom of the top sibling widget and the top of the bottom sibling widget.

Example

//Sample code to set the bottom property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.bottom = "50dp";

frmHome.widgetID.bottom = "10%";

frmHome.widgetID.bottom = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Accepts a reference to a Box Widget which represents a UI template for a custom callout.

Syntax

calloutTemplate

Type

kony.ui.Box

Read/Write

Read + Write

Remarks

The box template can only have Label, Link, RichText, Button and Image widgets.

If template is not provided, it will fallback to the platform specific default callout for backward compatibility. On iOS platform, onSelection event will not get fired for custom callout.

Platform Availability

• Available in the IDE
• Available on all platforms

Specifies the width of the callout on the map.

Syntax

calloutWidth

Type

Number

Read/Write

Read + Write

Remarks

The default value for this property is 80 percent.

When the Map Widget is inside a FlexContainer, the calloutWidth property of a Map Widget is ignored when using a Flex callout template because the Flex container has the width and height properties.

The property accepts a number between 1 to 100 in percentage relative to the Map Widget width. For example, 100 percent means the callout width should fill its Map Widget width. If the value specified is less than 1 or more than 100, the value of the property should fallback to 80 percent.

The calloutWidth property is applicable only for Box container templates. The calloutWidth property is not applicable for the FlexContainer templates.

Example

//Sample code to set the calloutWidth property of a Map widget.

frmMap.myMap.calloutWidth=80;

Platform Availability

• Available in the IDE
• Available on all platforms

This property determines the center of a widget measured from the left bounds of the parent container.

The centerX property determines the horizontal center of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, the distance is measured from the left edge of the parent container. In flow-horizontal layout, the distance is measured from the right edge of the previous sibling widget in the hierarchy.

Syntax

centerX

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as kony.flex.FLOW_HORIZONTAL, the centerX property is measured from right edge of the left sibling widget.

Example

//Sample code to set the centerX property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.centerX = "50dp";

frmHome.widgetID.centerX = "10%";

frmHome.widgetID.centerX = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

This property determines the center of a widget measured from the top bounds of the parent container.

The centerY property determines the vertical center of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the top edge of the parent container. In flow-horizontal layout, the distance is measured from the top edge of the parent container. In flow-vertical layout, the distance is measured from the bottom edge of the previous sibling widget in the hierarchy.

Syntax

centerY

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as kony.flex.FLOW_VERTICAL, the centerY property is measured from bottom edge of the top sibling widget.

Example

//Sample code to set the centerY property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.centerY = "50dp";

frmHome.widgetID.centerY = "10%";

frmHome.widgetID.centerY = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Specifies the available height of the container in terms of percentage. The percentage is based on the value of the containerHeightReference property.

If not configured, the value may vary depending on the platforms.

Syntax

containerHeight

Type

Number

Read/Write

Yes- (Read and Write)

Example

//Sample code to set the containerHeight property of a Map widget.

frmMap.myMap.containerHeight=80;

Accessible form IDE

Yes

Platform Availability

• Available on all platforms.

This property is enabled when you set the containerHeight. The widget height percentage is calculated based on the following options.

Default: CONTAINER_HEIGHT_BY_FORM_REFERENCE

The container height percentage is calculated based on the below options.

• CONTAINER_HEIGHT_BY_FORM_REFERENCE: The Map Widget's height is calculated based on the height of the Form excluding headers and footers. This property does not have any effect if the Map Widget is placed inside a pop-up or headers/footers.
• CONTAINER_HEIGHT_BY_PARENT_WIDTH: Use this option if the Map Widget is placed inside a Box Widget. The width is calculated based on the width of the Box Widget.

NOTE: To set the value through code, prefix the option with constants. such as constants.<option>.

Syntax

containerHeightReference

Type

Number

Read/Write

Yes - (Read and Write)

Example

//Sample code to set the containerHeightReference property of a Map widget.

frmMap.myMap.containerHeightReference=constants.CONTAINER_HEIGHT_BY_PARENT_WIDTH;

Accessible from IDE

Yes

Platform Availability

• Available on all platforms.

Specifies percentage of weight to be allocated by its parent widget. The parent widget space is distributed to its child widgets based on this weight factor. The child widgets of the parent widget should sum up to 100% of weight except when placed in kony.ui.ScrollBox.

Syntax

containerWeight

Type

Number (less than or equal to 100)

Read/Write

Yes - (Read and Write)

Example

//Sample code to set the containerWeight property of a Map widget.

frmMap.myMap.containerWeight=80;

Accessible from IDE

No

Platform Availability

• Available on all platforms

In Desktop Web applications, when you hover the mouse over any widget, a mouse pointer appears. Using the cursorType property in Visualizer, you can specify the type of the mouse pointer.

Syntax

cursorType

Type

String.

You must provide valid CSS cursor value such as wait, grab, help, etc. to the cursorType property.

Read/Write

Read + Write

Remarks

To add the cursorType property using Quantum Visualizer in a Desktop Web application, follow these steps.

1. In Quantum Visualizer, open the Desktop Web application. From the Project explorer, expand Responsive Web/ Desktop> Forms and select the form to which you need to make the changes.
2. On the canvas, select the widget for which you want to specify the cursor type. For example, button.
3. From the Properties panel, navigate to the Skin tab > Hover Skin tab.
   You will find that the details of the hover skin is not enabled here.
4. Check the Enable option to add a hover skin to your widget.
   The details and configurations of the hover skin is enabled.
5. Under the General section, for the Platform option, click the ellipsis icon.
   The Fork Skin window appears.
6. In the Fork Skin window, for Desktop, check under HTML5 SPA.
7. Click Ok. You have successfully forked your hover skin for Desktop Web application.
   You can see that the Cursor Type property has been added under the General section.
8. Select a value from the drop-down list to set the Cursor Type for the widget.

Example

 

//This is a generic property and is applicable for many widgets.

/*The example provided is for the Button widget. Make the required changes in the example while using other widgets.*/

frmButton.myButton.cursorType = "wait";

Platform Availability

• Available in IDE
• Desktop Web

The default map pin image used to indicate a location on map.

Syntax

defaultPinImage

Type

String or Image Object

Read/Write

Read + Write

Remarks

The defaultPinImage property can accept the pin image as a name string or as a JavaScript pin object. The pin object contains the following keys.

Example

//Sample code to set the defaultPinImage property of a Map widget.

frmMap.myMap.defaultPinImage="kmpin.png";

Setting the pin image using an image object.

frm1.map1.defaultPinImage = {
    source: "ZA8976AG..", //base64 string
    sourceType: kony.map.PIN_IMG_SRC_TYPE_BASE64,
    anchor: kony.map.PIN_IMG_ANCHOR_BOTTOM_CENTER
};

Platform Availability

• Available in the IDE
• Available on all platforms

The enable property is used to control the actionability of the widgets. In a scenario where you want to display a widget but not invoke any action on the widget, configure the enable property to false to achieve it.

This is a constructor level property and applicable for all widgets in Quantum Visualizer.

Syntax

enable

Type

Boolean

Read/Write

Read + Write

Remarks

The default value of this property is true.

• When enable property is configured to true, the action associated with a widget can be invoked by the user in the application.
• When enable property is configured to false, the action associated with a widget cannot be invoked by the user in the application.

Example

//This is a generic property and is applicable for many widgets.

/*The example provided is for the Button widget. Make the changes required in the example while using other widgets.*/

frmButton.myBtn.enable= true;

Platform Availability

• Android
• iOS
• Desktop web

The property helps you define index to a Map Widget added in any container such as FlexForm, FlexContainer.

Syntax

enableMultipleCallouts

Type

Boolean

Read/Write

Read + Write

Remarks

If set to false then the default behavior of the map is shown

If set to true then callout’s visibility is controlled with setCalloutVisibility method.

When enableMultipleCallouts is set to TRUE, default callouts will not be supported.

Example

//Sample code to set the enableMultipleCallouts property of a Map widget.
Form1.map.enableMultipleCallouts = true;

Availability

• iOS
• Android

This property helps you to either enable or disable toolbar of a Map widget.

Syntax

enableToolBar

Type

Boolean

Read/Write

Read + Write

Remarks

The default value of this property is true.

Example

//Sample code to set the enableToolBar property of a Map widget.

frmMap.myMap.enableToolBar=true;

Availability

• Android

It determines the height of the widget and measured along the y-axis.

The height property determines the height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. For supported widgets, the height may be derived from either the widget or container’s contents by setting the height to “preferred”.

Syntax

height

Type

Number, String, and Constant

Read/Write

Read + Write

Remarks

Following are the available measurement options:

• %: Specifies the values in percentage relative to the parent dimensions.
• px: Specifies the values in terms of device hardware pixels.
• dp: Specifies the values in terms of device independent pixels.
• default: Specifies the default value of the widget.
• kony.flex.USE_PREFERED_SIZE: When this option is specified, the layout uses preferred height of the widget as height and preferred size of the widget is determined by the widget and may varies between platforms.

Example

/*Sample code to set the height property for a Map widget by using DP, Percentage and Pixels.*/
frmMap.myMap.height="50dp";

frmMap.myMap.height="10%";

frmMap.myMap.height="10px";

Platform Availability

• Available in the IDE
• iOS
• Android

The id property is a unique identifier of the Map Widget consisting of alphanumeric characters. Every Map Widget should have a unique id within a Form.

Syntax

id

Type

String

Read/Write

Read only

Example

//Defining the properties for Map with the id: "map1"
var mapBasicConf = {
    id: "map1",
    provider: constants.MAP_PROVIDER_GOOGLE,
    mapKey: "0z5UtaSPUYj42f5qX0VAwmDGLX39Qxgbtcra0TA",
    defaultPinImage: "kmpin.png",
    isVisible: true,
    screenLevelWidget: false
};
var mapLayoutConf = {
    margin: [20, 40, 50, 20],
    containerWeight: 100
};
var mapPSPConf = {};
//Creating the Map
var map = new kony.ui.Map(mapBasicConf, mapLayoutConf, mapPSPConf);
//Reading the id of the Map
alert("Map ID is :" + map.id);

Platform Availability

• Available in the IDE
• Available on all platforms

Specifies the source of the image for pins on the map.

Syntax

imageSourceType

Type

Constant

Read/Write

Read only

Remarks

This property can be set to one of the following values.

If the imageSourceType property is not set, the Map Widget uses the default value of kony.map.PIN_IMG_SRC_TYPE_RESOURCES.

Additional pin image constants are available to anchor the pin image. These constants are found in the API Developer's Guide.

Example

kony.print("The imageSource type is:" + FormMap.map1.imageSourceType);

Platform Availability

• Available in the IDE
• Available on all platforms

A custom JSObject with the key value pairs that a developer can use to store the context with the Map Widget.

Syntax

info

Type

JSObject

Read/Write

Read + Write

Remarks

The info property will help in avoiding the globals to most part of the programming.

The info property is a non-constructor property. You cannot set this property through a widget constructor. You can read and write data to it.

The info property can hold any JSObject. After assigning the JSObject to the info property, the JSObject should not be modified. For example:

var inf = {
    a: "hello"
};
widget.info = inf;
widget.info.a = "hello world";
//This will not update the widget info a property to hello world. 
//widget.info.a will have the old value as hello.

Example

//Sample code to set info property for a Map widget.

frmMap.myMap.info = {
    key: "My location"
};

//Reading the info of the Map widget.
kony.print("Map widget info:" +frmMap.myMap.info);

Platform Availability

• Available in the IDE
• Available on all platforms

The isVisible property controls the visibility of a widget on the form.

Syntax

isVisible

Type

Boolean

Read/Write

Read + Write

Remarks

The default value for the isVisible property is true.

If set to false, the widget is not displayed.

If set to true, the widget is displayed.

Example

//Sample code to set the isVisible property of a Map widget.
frmMap.myMap.isVisible=true;

NOTE: You can set the visibility of a widget dynamically from code using the setVisibility method.

Platform Availability

• Available in the IDE
• Available on all platforms

This property determines the lower left corner edge of the widget and is measured from the left bounds of the parent container.

The left property determines the position of the left edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, the distance is measured from the left edge of the parent container. In flow-horizontal layout, the distance is measured from the right edge of the previous sibling widget in the hierarchy.

Syntax

left

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as kony.flex.FLOW_HORIZONTAL, the left property is measured from right edge of the left sibling widget.

Example

//Sample code to set the left property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.left = "50dp";

frmHome.widgetID.left = "10%";

frmHome.widgetID.left = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

The locationData property helps you specify the data of the location highlighted on the Map Widget.

Syntax

locationData

Type

Array.

Read/Write

Read + Write

Remarks

The following keys required in the location JSObject:

• lat [String] [Mandatory]: Specifies the latitude of the location.
• lon [String] [Mandatory]: Specifies the longitude of the location.
• name [String] [Mandatory]: Specifies a short description for the location.
• desc [String] [Mandatory]: Specifies a long description for the location.
• image [String or Image Object] [Mandatory]: Specifies the map pin image that overrides the defaultPinImage.
• navigateAndZoom [Boolean] [Optional]: Decides whether the navigation to first pin should take place. It is available on Android and iOS.
  Default value: true for all platforms.
  Example:
  locationData:[{lat:"17.445775", lon:"78.3731",name: "Campus 1", desc: "My Office Campus" ,navigateAndZoom:true }]};
  
• showcallout [Boolean] [Optional]: Shows the callout pop-up. The default value is true.
• calloutData [JSObject] [Optional]: Specifies the widget data for a given template for a particular location. The value should be a map of key-value pairs. The data can have one of the standard keys called "template" that accepts a box reference, to provide location-specific template, which overrides the widget level "calloutTemplate." The sample format of the data is follows: {dataId1:"", dataId2:"" ,dataId3:"", template:boxRef2}.

NOTE: The widget-data map for a template must be provided in the "widgetDataMapForCallout" property.

• zIndex[Number] [Optional]: Applicable for Android platform only.
  Specifies the stack order of pins in the Map widget. You can set a Double or Integer value (including negative value) as zIndex. When a pin is added to the Map widget with a higher zIndex, it will be placed in front of other pins with lower zIndices. If multiple pins are placed at the same co-ordinates, then the onPinClick event is first triggered for the pin with a higher zIndex. The onPinClick event is then triggered for the rest of the pins in a descending order of zIndex on consecutive clicks. The default value of this parameter is zero.

  NOTE: In Android platform, in a map the z-index value stack of the pins are different from the z-index stack of the shapes. The pins are drawn on top of the shapes based on their z-index values. Also, when the pins and shapes (such as circle and polyline) are placed on the map on top of each other, the click event of the pins have a higher priority than the click events of the shapes.

The image property of the locationData property can accept the pin image as a name string or as a JavaScript pin object. The pin object contains the following keys.

Examples

Creating a map.

//Sample code to set the locationData property of a Map widget.
frmMap.myMap.locationData = [{
 lat: "17.445775",
 lon: "78.3731",
 name: "Campus 1",
 desc: "My Office Campus"
}];

Specifying the pin image as a string.

locationData = {
	…
	Image = "mypinimage.png";
	….
}

Specifying the pin image using file path.

locationData = {
	….
	image = {
	source:kony.io. getDataDirectoryPath()+"/mappin.png",
	sourceType:kony.map.PIN_IMG_SRC_TYPE_FILE_PATH,
	anchor:kony.map.PIN_IMG_ANCHOR_BOTTOM_RIGHT
   };
	….
}

Specifying the location data with custom pin images and flex callout template. This example is applicable to Android and iOS.

var imgConfigfilePath;

var base64StringImage;

/* Store the images in the file path */
function storeImageinFilePath() {
    var url = "https://cdn3.iconfinder.com/data/icons/free-social-icons/67/facebook_circle_color-32.png";
    var httpReq = new kony.net.HttpRequest();
    httpReq.open(constants.HTTP_METHOD_GET, url, false);
    httpReq.send();
    if (httpReq.responseType == constants.HTTP_RESPONSE_TYPE_RAWDATA) {
        var file = new kony.io.File(kony.io.FileSystem.getDataDirectoryPath() + "/" + "ratingstar.png");
        file.createFile();
        file.write(httpReq.response);
        var fullPath = file.fullPath;
        imgConfigfilePath = {
            source: fullPath,
            sourceType: kony.map.PIN_IMG_SRC_TYPE_FILE_PATH
        };
    }
}

/* Getting image from base64 string */
function getImageFrombase64String() {
    var base64String1 = "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";
    var base64StringImage = {
        source: base64String1,
        sourceType: kony.map.PIN_IMG_SRC_TYPE_BASE64
    };
}

function SetLocationData() {
    storeImageinFilePath();
    getImageFrombase64String();
    //Flextemp is a flex template.
    frmMap11.Map0620ca100759c4c.calloutTemplate = Flextemp;
    frmMap11.Map0620ca100759c4c.widgetDataMapForCallout = {
        "lbl1": "lbl1"
    };
    rmMap11.Map0620ca100759c4c.locationData = [{
        lat: "17.447326",
        lon: "78.371358",
        name: "Temenos",
        desc: "Phoenix infocity, Gachibowli",
        image: {
            source: "pin1.png",
            sourceType: kony.map.PIN_IMG_SRC_TYPE_RESOURCES,
            anchor: kony.map.PIN_IMG_ANCHOR_TOP_LEFT
        },
        showCallout: true,
        calloutData: {
            lbl1: {
                text: "konylabs.com(new)"
            }
        }
    }, {
        lat: "17.445252",
        lon: "78.378271",
        name: "tcs",
        desc: "Phoenix infocity, Gachibowli",
        image: imgConfigfilePath,
        showCallout: true,
        calloutData: {
            lbl1: {
                text: "TCS"
            }
        }
    }, {
        lat: "17.450368",
        lon: "78.381052",
        name: "Cyber Towers",
        desc: "Phoenix infocity, Gachibowli",
        image: base64StringImage,
        showCallout: true,
        calloutData: {
            lbl1: {
                text: "CyberTowers"
            }
        }
    }];
}

Platform Availability

• Available in the IDE
• Available on all platforms

The map key required to connect to the map provider service. Since Visualizer only supports Google maps, the mapKey property accepts the Google map key.

Syntax

mapKey

Type

String

Read/Write

No

Remarks

A separate map key is needed for the Android platform based on the Android SDK map key requirements, which is different from the map key requirements for static/ dynamic JavaScript based on the Google map key.

For more information on configuring the map keys, refer to Generating and Configuring Map API Keys.

Example

/* Defining the properties for Map with mapKey:"0z5UtaSPUYj42f5qX0VAwmDGLX39Qxgbtcra0TA"*/
var mapBasicConf = {
    id: "map1",
    provider: constants.MAP_PROVIDER_GOOGLE,
    mapKey: "0z5UtaSPUYj42f5qX0VAwmDGLX39Qxgbtcra0TA",
    defaultPinImage: "kmpin.png",
    isVisible: true,
    screenLevelWidget: false
};
var mapLayoutConf = {
    margin: [20, 40, 50, 20],
    containerWeight: 100
};
var mapPSPConf = {};
//Creating the Map
var map = new kony.ui.Map(mapBasicConf, mapLayoutConf, mapPSPConf);

Platform Availability

• Available in the IDE
• Available on all platforms

Defines the space around a widget. You can use the option to define the left, top, right, and bottom distance between the widget and the next element.

To define the margin values for a platform, click the Click to Editbutton against the property to open the Margin screen. Select the checkbox against the platform for which you want to define the margins, and enter the top, left, right, and bottom margin values.

If you want to use the margin values set for a platform across other platforms, you can click the Apply To button, and select the platforms on which you want the margin values to be applied.

The following image illustrates the window to define the margins for platforms:

The following image illustrates a widget with a defined margin:

Syntax

margin

Type

Array of numbers

Read/Write

Yes - (Read and Write)

Example

//Sample code to set the margin property of a Map widget.
frmMap.myMap.margin= [20, 40, 50, 20]; 

Accessible from IDE

Yes

Platform Availability

• Available on all platforms

Indicates if the margin is to be applied in pixels or in percentage.

Default: false

If set to true, the margin is applied in pixels.

If set to false, the margin is applied as set in the margin property.

Syntax

marginInPixel

Type

Boolean

Read/Write

No

Example

//Sample code to set the marginInPixel property of a Map widget.
frmMap.myMap.marginInPixel=true;

Accessible from IDE

Yes

Platform Availability

• iPhone
• iPad
• Android

This property specifies the maximum height of the widget and is applicable only when the height property is not specified.

The maxHeight property determines the maximum height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The maxHeight value overrides the preferred, or “autogrow” height, if the maxHeight is less than the derived content height of the widget.

Syntax

maxHeight

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the maxHeight property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.maxHeight = "50dp";

frmHome.widgetID.maxHeight = "10%";

frmHome.widgetID.maxHeight = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

This property specifies the maximum width of the widget and is applicable only when the width property is not specified.

The Width property determines the maximum width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The maxWidth value overrides the preferred, or “autogrow” width, if the maxWidth is less than the derived content width of the widget.

Syntax

maxWidth

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the maxWidth property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.maxWidth = "50dp";

frmHome.widgetID.maxWidth = "10%";

frmHome.widgetID.maxWidth = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

This property specifies the minimum height of the widget and is applicable only when the height property is not specified.

The minHeight property determines the minimum height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The minHeight value overrides the preferred, or “autogrow” height, if the minHeight is larger than the derived content height of the widget.

Syntax

minHeight

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the minHeight property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.minHeight = "50dp";

frmHome.widgetID.minHeight = "10%";

frmHome.widgetID.minHeight = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

This property specifies the minimum width of the widget and is applicable only when the width property is not specified.

The minWidth property determines the minimum width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The minWidth value overrides the preferred, or “autogrow” width, if the minWidth is larger than the derived content width of the widget.

Syntax

minWidth

Type

Number

Read/Write

Read only

Example

//Sample code to set the minWidth property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.minWidth = "50dp";

frmHome.widgetID.minWidth = "10%";

frmHome.widgetID.minWidth = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Specifies the view mode to view the map.

Syntax

mode

Type

Number

Read/Write

Read + Write

Remarks

The default value for the property is MAP_VIEW_MODE_NORMAL.

NOTE: From Quantum Visualizer V8 SP4 FP 43, when a user changes the map mode by using the native UI, the mode property returns the latest modified value. This value does not change even when the user navigates to another form, and then, returns to the form with the map. The map will open in the mode set by the user.
For example, the user changes the mode of the map from normal to satellite. Then the user navigates to another form and returns to the form with the map. The map will open in the satellite mode.
This behavior is applicable only for Desktop Web applications.

The mode options are:

MAP_VIEW_MODE_NORMAL:Traditional depiction of roads, parks and borders.

MAP_VIEW_MODE_SATELLITE: Map showing aerial imagery.

MAP_VIEW_MODE_STREET: Navigate within street-level imagery.

MAP_VIEW_MODE_HYBRID: Street map superimposed on Satellite map.

MAP_VIEW_MODE_POLYGON: Map showing the polygonal area as specified in locationdata property.

MAP_VIEW_MODE_TRAFFIC: Specifies the streets with different colors to indicate traffic information on the map. The color green indicates low traffic, orange indicates medium traffic and red indicates heavy traffic.

MAP_VIEW_MODE_TERRAIN: Map showing the surface of the land in 3D view.

The following images illustrate Normal Mode, Satellite Mode, and Street Mode.

Normal Mode	Satellite Mode	Street Mode

The following images illustrate the Polygon Mode, Hybrid Mode, and Traffic Mode.

Polygon Mode	Hybrid Mode	Traffic Mode

The following image illustrates the Terrain Mode

Terrain Mode

The following table shows the list of map modes and their availability in respective platforms:

NOTE: The polygon mode is applicable only if the mapSource is MAP_SOURCE_NON_NATIVE.

Example

//Sample code to set the mode property of a Map widget.

frmMap.myMap.mode=constants.MAP_VIEW_MODE_HYBRID;

Platform Availability

• Available in the IDE
• iPhone
• iPad
• Android

Specifies the opacity of the widget. The value of this property must be in the range 0.0 (transparent) to 1.0 (opaque). Any values outside this range are fixed to the nearest minimum or maximum value.

Specifies the opacity of the widget. Valid opacity values range from 0.0 (transparent), to 1.0 (opaque). Values set to less than zero will default to zero. Values more than 1.0 will default to 1. Interaction events set on a transparent widget will still be fired. To disable the events, also set the “isVisible” property to “false”.

Syntax

opacity

Type

Number

Read/Write

Read + Write

Remarks

• This property has more priority compared to the values coming from the configured skin.

Example

//Sample code to make the widget transparent by using the opacity property.
frmHome.widgetID.opacity = 0;

//Sample code to make the widget opaque by using the opacity property.
frmHome.widgetID.opacity = 1;

Platform Availability

• Not available in the IDE.
• iOS
• Android
• Desktop Web

Helps you access the parent of the widget. If the widget is not part of the widget hierarchy, the parent property returns null.

Syntax

parent

Read/Write

Read only

Remarks

• The property works for all the widgets inside a FlexForm, FlexContainer or FlexScrollContainer.

Example

function func() {

    kony.print("The parent of the widget" + JSON.stringify(Form1.widgetID.parent));

}

Platform Availability

• Not available in the IDE
• iOS
• Android
• Desktop Web

Specifies the map data provider.

Syntax

provider

Type

Number

Read/Write

No

Remarks

The default value for the provider property is MAP_PROVIDER_GOOGLE.

Example

For example, you can set the map provider as Google or Bing based on your location and requirement.

//Defining the properties for Map with provider:constants.MAP_PROVIDER_GOOGLE
var mapBasicConf = {
    id: "map1",
    provider: constants.MAP_PROVIDER_GOOGLE,
    mapKey: "0z5UtaSPUYj42f5qX0VAwmDGLX39Qxgbtcra0TA",
    defaultPinImage: "kmpin.png",
    isVisible: true,
    screenLevelWidget: false
};
var mapLayoutConf = {
    margin: [20, 40, 50, 20],
    containerWeight: 100
};
var mapPSPConf = {};
//Creating the Map
var map = new kony.ui.Map(mapBasicConf, mapLayoutConf, mapPSPConf);

Platform Availability

• Available in the IDE
• Available on all platforms

This property is used to retain the content alignment property value, as it was defined.

NOTE: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue) {
    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainContentAlignment

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.


//Here, we have shown how to use the retainContentAlignment property for Button widget.
/*You need to make a corresponding use of the 
retainContentAlignment property for other applicable widgets.*/
var btn = new kony.ui.Button({
    "focusSkin": "defBtnFocus",
    "height": "50dp",
    "id": "myButton",
    "isVisible": true,
    "left": "0dp",
    "skin": "defBtnNormal",
    "text": "text always from top left",
    "top": "0dp",
    "width": "260dp",
    "zIndex": 1
}, {
    "contentAlignment": constants.CONTENT_ALIGN_TOP_LEFT,
    "displayText": true,
    "padding": [0, 0, 0, 0],
    "paddingInPixel": false,
    "retainFlexPositionProperties": false,
    "retainContentAlignment": true
}, {});

Platform Availability

• Available in IDE
• iOS
• Android

This property is used to retain flex positional property values as they were defined. The flex positional properties are left, right, and padding.

NOTE: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue) {
    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainFlexPositionProperties

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.


//Here, we have shown how to use the retainFlexPositionProperties property for the Button widget.
/*You need to make a corresponding use of the 
retainFlexPositionProperties property for other applicable widgets.*/
var btn = new kony.ui.Button({
    "focusSkin": "defBtnFocus",
    "height": "50dp",
    "id": "myButton",
    "isVisible": true,
    "left": "0dp",
    "skin": "defBtnNormal",
    "text": "always left",
    "top": "0dp",
    "width": "260dp",
    "zIndex": 1
}, {
    "contentAlignment": constants.CONTENT_ALIGN_CENTER,
    "displayText": true,
    "padding": [0, 0, 0, 0],
    "paddingInPixel": false,
    "retainFlexPositionProperties": true,
    "retainContentAlignment": false
}, {});

Platform Availability

• Available in IDE
• iOS
• Android

This property is used to convert Flow Horizontal Left to Flow Horizontal Right.

NOTE: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue){

    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainFlowHorizontalAlignment

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.


//Here, we have shown how to use the retainFlowHorizontalAlignment property for Button widget.
/*You need to make a corresponding use of the 
retainFlowHorizontalAlignment property for other applicable widgets. */
var btn = new kony.ui.Button({
 "focusSkin": "defBtnFocus",
 "height": "50dp",
 "id": "myButton",
 "isVisible": true,
 "left": "0dp",
 "skin": "defBtnNormal",
 "text": "always left",
 "top": "0dp",
 "width": "260dp",
 "zIndex": 1
}, {
 "contentAlignment": constants.CONTENT_ALIGN_CENTER,
 "displayText": true,
 "padding": [0, 0, 0, 0],
 "paddingInPixel": false,
 "retainFlexPositionProperties": true,
 "retainContentAlignment": false,
 "retainFlowHorizontalAlignment ": false
}, {});

Platform Availability

• Available in IDE
• iOS
• Android

This flag indicates whether to retain mapPosition or bounds on map restore. This means that when retainMapPositionOnRestore is true, the last viewed map position/bounds (which is the map postion/bounds before navigating away from the form that contains the map) stays intact when you revisit the form that contains the map widget.

Example

retainMapPositionOnRestore

Default Value

false (for Android)

Read/Write

Read + Write

Example

Form2.map1.retainMapPositionOnRestore = true;

Platform Availability

• Android

This property determines the lower right corner of the widget and is measured from the right bounds of the parent container.

The right property determines the position of the right edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, value is ignored. In flow-horizontal layout, the value is ignored.

The right property is used only if the width property is not provided.

Syntax

right

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as kony.flex.FLOW_HORIZONTAL, the right property is measured from left edge of the right sibling widget. The horizontal space between two widgets is measured from right of the left sibling widget and left of the right sibling widget.

Example

//Sample code to set the right property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.right = "50dp";

frmHome.widgetID.right = "10%";

frmHome.widgetID.right = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Specifies whether the widget should occupy the whole container excluding space for headers and footers, if any.

Syntax

screenLevelWidget

Type

Boolean

Read/Write

No

Remarks

If set to false, the map occupies the space as set in the IDE or layout properties.

If set to true, the map occupies the whole space on the container.

Example

//Sample code to set the screenLevelWidget property of a Map widget.
frmMap.myMap.screenLevelWidget=true;

Platform Availability

• Available in the IDE
• Available on all platforms.

Indicates the current location on a map as a pin, circle, or none.

Syntax

showCurrentLocation

Type

Number

Read/Write

Yes

Remarks

Following are the options available for iOS:

• MAP_VIEW_SHOW_CURRENT_LOCATION_NONE. This is the default value.
• MAP_VIEW_SHOW_CURRENT_LOCATION_AS_PIN
• MAP_VIEW_SHOW_CURRENT_LOCATION_AS_CIRCLE

For Android, the showCurrentLocation property accepts only Boolean values.

• true: the current location is shown on the map with blue circle and a camera handle on top of the map.
• false: the current location is not indicated on the map. This is the default value.

NOTE: The property is supported only from the Google Maps V2 version.

For Android, make sure that the following are defined under the Manifest Properties.

1. Open the application, and click Project Settings icon. The Project Settings window opens.
2. Click the Native tab, and then click Android sub-tab.
3. Under the Manifest Properties, click the Permissions tab.
4. Select the following options from the left pane and click Add. Make sure that the selected options are moved to the right pane.
• ACCESS_COARSE_LOCATION
• ACCESS_FINE_LOCATION
• WRITE_EXTERNAL_STORAGE
5. Under the Manifest Properties, click the Tags tab.
6. In the Child tab entries under <application > tag box, add the following tag.

<meta-data Android:name="com.google.Android.gms.version" Android:value="@integer/google_play_services_version" />

7. Click Finish.

Example for iOS

//Sample code to set the showCurrentLocation property of a Map widget.

frmMap.myMap.showCurrentLocation=constants.MAP_VIEW_SHOW_CURRENT_LOCATION_AS_PIN;

Example for Android

//Sample code to set the showCurrentLocation property of a Map widget.

frmMap.myMap.showCurrentLocation=true;

Platform Availability

• Available in the IDE only for iOS
• iOS
• Android

Indicates if the zoom control is to be displayed on the map.

Syntax

showZoomControl

Type

Boolean

Read/Write

Read + Write

Remarks

The default value for the showZoomControl property is true.

If set to false, the zoom control is displayed.

If set to true, the zoom control is not displayed.

Example

//Sample code to set the showZoomControl property of a Map widget.

frmMap.myMap.showZoomControl=true;

Platform Availability

• Available in the IDE
• Android
• Desktop Web

This property determines the top edge of the widget and measured from the top bounds of the parent container.

The top property determines the position of the top edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the top edge of the parent container. In flow-vertical layout, the distance is measured from the bottom edge of the previous sibling widget in the hierarchy. In flow-horizontal layout, the distance is measured from the left edge of the parent container.

Syntax

top

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as kony.flex.FLOW_VERTICAL, the top property is measured from the bottom edge of the top sibling widget. The vertical space between two widgets is measured from bottom of the top sibling widget and top of the bottom sibling widget.

Example

//Sample code to set the top property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.top = "50dp";

frmHome.widgetID.top = "10%";

frmHome.widgetID.top = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Contains an animation transformation that can be used to animate the widget.

Syntax

transform

Type

JSObject

Read/Write

Read + Write

Remarks

This property is set to the identify transform by default. Any transformations applied to the widget occur relative to the widget's anchor point. The transformation contained in this property must be created using the kony.ui.makeAffineTransform function.

Example

This example uses the button widget, but the principle remains the same for all widgets that have a transform property.

//Animation sample
var newTransform = kony.ui.makeAffineTransform();
newTransform.translate3D(223, 12, 56);

//translates by 223 xAxis,12 in yAxis,56 in zAxis
widget.transform = newTransform;

Platform Availability

• iOS
• Android

Specifies the mapping between the widget identifiers and data identifiers.

Syntax

widgetDataMapForCallout

Type

JSObject

Read/Write

Read + Write

Remarks

The map must contain all widget data maps referred across multiple templates, including the dynamic templates for each map location, if any. The map accepts the data as key-value pairs, where key is the widget identifier and value is the data identifier.

On the iOS platform, the onSelection event is triggered for a custom callout.

Example

//Sample code to set the widgetDataMapForCallout property of a Map widget.

frmMap.myMap.widgetDataMapForCallout = {
 "flxMap": "flxMap",
 "lbl1": "lbl1"
};

Platform Availability

• Available in the IDE
• Available on all platforms

This property determines the width of the widget and is measured along the x-axis.

The width property determines the width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. For supported widgets, the width may be derived from either the widget or container’s contents by setting the width to “preferred”.

Syntax

width

Type

Number, String, and Constant

Read/Write

Read + Write

Remarks

Following are the options that can be used as units of width:

• %: Specifies the values in percentage relative to the parent dimensions.
• px: Specifies the values in terms of device hardware pixels.
• dp: Specifies the values in terms of device independent pixels.
• default: Specifies the default value of the widget.
• kony.flex.USE_PREFERED_SIZE: When this option is specified, the layout uses preferred width of the widget as width and preferred size of the widget is determined by the widget and may varies between platforms.

Example

//Sample code to set the width property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.width = "50dp";

frmHome.widgetID.width = "10%";

frmHome.widgetID.width = "10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

This property specifies the stack order of a widget. A widget with a higher zIndex is always in front of a widget with a lower zIndex.

The zIndex property is used to set the stack, or layer order of a widget. Widgets with higher values will appear “over”, or “on top of” widgets with lower values. Widgets layered over other widgets will override any interaction events tied to widgets beneath. Modifying the zIndex does not modify the order of the widgets in the Quantum Visualizer hierarchy, inside of a flexContainer or form. The zIndex property accepts only positive values.

Syntax

zIndex

Type

Number

Read/Write

Read + Write

Remarks

The default value for this property is 1.

NOTE: Modifying the zIndex does not modify the order of the widgets inside the FlexContainer. If zIndex is same for group of overlapping widgets then widget order decides the order of overlapping. The last added widget is displayed on top.

From Quantum Visualizer V9 SP2 FP7, developers can configure the Z Index value for a Responsive Web app as Auto or Custom. When the selected Z Index value is Auto, the default Z Index value of 1 is applied. When the selected Z Index value is Custom, developers can specify a desired numeric value.

Prior to the V9 SP2 FP7 release, the default value for the Z Index was 1. When developers imported any third-party libraries with the Z index set as Auto, content overflow was disabled as the value of Auto is less than 1.

NOTE: The Z Index value Auto is supported only when the Enable JS Library mode is configured as unchecked.

For existing components, the value of the Z Index is configured as 1 for the Native channel. For the Responsive Web channel, the Z Index will be set as Custom with 1 as the value.

For new components, the value of the Z Index is configured as 1 for the Native channel. For the Responsive Web channel, the Z Index will be set as Auto or 1 based on the project level settings.

NOTE: If ModalContainer property is set to true in any of the FlexContainer widget, the Z Index value of that container and all of its parent containers should be set to Custom.

kony.flex.ZINDEX_AUTO : Constant to configure the Z Index value as auto programmatically.

//Sample code to set the ZIndex value to Auto
 var flx = new kony.ui.FlexContainer({ 
  "id": "flx"
  "zIndex": kony.flex.ZINDEX_AUTO
});

//Sample code to set the ZIndex value to Auto
flx.zIndex = kony.flex.ZINDEX_AUTO;

Example

//Sample code to set the zIndex property for widgets.
frmHome.widgetID.zIndex = 300;

Platform Availability

• Available in the IDE
• iOS
• Android
• Desktop Web

Sets the zoom level for the current map view. The range varies from platform to platform.

zoomLevel accepts floating values to improve precision.

Syntax

zoomLevel

Type

Number

Read/Write

Read + Write

Remarks

Following are the range and default values on different platforms:

• iPhone: [0-28], the default is 14.
• Android: [1-21], the default is 15.
• Desktop Web: 0-22, the default value is 15.

Example

//Sample code to set the zoomLevel property of a Map widget.

frmMap.myMap.zoomLevel=10.5;

Platform Availability

• Available in the IDE
• Android
• iPhone/ iPad
• Desktop Web