Browser Methods

The Browser widget is associated with the following methods:

This API allows you to set a gesture recognizer for a specified gesture for a specified widget.

Syntax

addGestureRecognizer(gestureType, gestureConfigParams, onGestureClosure)

Parameters

gestureType

[Number] - Mandatory

Indicates the type of gesture to be detected on the widget.

See Remarks for possible values.

gestureConfigParams

[object] - Mandatory

The parameter specifies a table that has the required configuration parameters to setup a gesture recognizer.

The configuration parameters vary based on the type of the gesture.

See Remarks for possible values.

onGestureClosure

[function] - Mandatory

Specifies the function that needs to be executed when a gesture is recognized.

This function will be raised asynchronously

See Remarks for the syntax of this function.

Return Values

String - Reference to the gesture is returned.

Remarks

The values for the gestureTypeparameter are:

[Number] - Mandatory

Indicates the type of gesture to be detected on the widget. The following are possible values:

  • 1 – constants.GESTURE_TYPE_TAP
  • 2 - constants.GESTURE_TYPE_SWIPE
  • 3 – constants.GESTURE_TYPE_LONGPRESS
  • 4 – constants.GESTURE_TYPE_PAN
  • 5 – constants.GESTURE_TYPE_ROTATION
  • 6 - constants.GESTURE_TYPE_PINCH
  • 7 - constants.GESTURE_TYPE_RIGHTTAP

The values for the gestureConfigParamsparameter are:

[object] - Mandatory

The parameter specifies a table that has the required configuration parameters to setup a gesture recognizer. The configuration parameters vary based on the type of the gesture.

This parameter supports the following key-value pairs:

Gesture Type:TAP

  • fingers [Number] - specifies the maximum number of fingers that must be respected for a gesture. Possible values are: 1. Default value is 1.
  • taps [Number] - specifies the maximum number of taps that must be respected for a gesture. Possible values are: 1 or 2. Default value is 1.

For example: {fingers:1,taps:1}

Gesture Type:SWIPE

  • fingers [Number] - specifies the maximum number of fingers that must be respected for a gesture. Possible values are: 1. Default value is 1.

For example: {fingers: 1}

Gesture Type:LONGPRESS

  • pressDuration [Number] - specifies the minimum time interval (in seconds) after which the gesture is recognized as a LONGPRESS. For example, if pressDuration is 2 seconds, any continued press is recognized as LONGPRESS only if it lasts for at least 2 seconds. Default value is 1.

For example: {pressDuration=1}.

Gesture Type: PAN

  • fingers [number] specifies the minimum number of fingers needed to recognize this gesture. Default value is 1.
  • continuousEvents [Boolean] indicates if callback should be called continuously for every change beginning from the time the gesture is recognized to the time it ends.

Gesture Type: ROTATION

  • Rotation gesture involves only two fingers.
  • continuousEvents [Boolean] indicates if callback must be called continuously for every change beginning from the time the gesture is recognized to the time it ends.

Gesture Type:PINCH

  • Pinch gesture invloves two fingures.
  • continuousEvents [Boolean] indicates if callback should be called continuously every change beginning from the time the gesture is recognized to the time it ends.

The syntax for the onGestureClosurecallback function are:

[function] - Mandatory

Specifies the function that needs to be executed when a gesture is recognized.

This function will be raised asynchronously and has the following Syntax: onGestureClosure(widgetRef, gestureInfo, context)

  • widgetRef - specifies the handle to the widget on which the gesture was recognized.
  • gestureInfo - Table with information about the gesture. The contents of this table vary based on the gesture type.
  • context - Table with SegmentedUI row details.

gestureInfo table has the following key-value pairs:

  • gestureType [number] – indicates the gesture type; 1 for TAP, 2 for SWIPE, and 3 for LONGPRESS,4 for PAN, 5 for ROTATION, 6 for PINCH and 7 for RIGHTTAP
  • gesturesetUpParams [object] – specifies the set up parameters passed while adding the gesture recognizer
  • gesturePosition [number] – indicates the position where the gesture was recognized. Possible values are: 1 for TOPLEFT, 2 for TOPCENTER, 3 for TOPRIGHT, 4 for MIDDLELEFT, 5 for MIDDLECENTER, 6 for MIDDLERIGHT, 7 for BOTTOMLEFT, 8 for BOTTOMCENTER, 9 for BOTTOMRIGHT, 10 for CENTER
  • swipeDirection [number] –indicates the direction of swipe. This parameter is applicable only if the gesture type is SWIPE. Possible values are: 1 for LEFT, 2 for RIGHT, 3 for TOP, 4 for BOTTOM. Direction is w.r.t the view and not device orientation.
  • gestureX [number] – specifies the X coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system.
  • gestureY [number] – specifies the Y coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system.
  • widgetWidth [number] – specifies the width of the widget (in pixels)
  • widgetHeight [number] – specifies the height of the widget (in pixels)
  • gestureState[number] – indicates the gesture state as below
  • 1 – gesture state begin
  • 2 - gesture state changed
  • 3 – gesture state ended.
  • * gestureState is applicable only for continuous gestures like PAN, ROTATION and PINCH.
  • rotation [number] rotation of the gesture in degrees since its last change.( Applicable only when gesture type is ROTATION
  • velocityX and velocityY : horizontal and vertical component of velocity expressed in points per second. (Applicable only for PAN gesture type)
  • velocity [number]: velocity of pinch in scale per second (Applicable for Pinch gesture)
  • scale [number]:scale factor relative to the points of the two touches in screen coordinates
  • touchType[number]:(windows only)
  • 0 - constants.TOUCHTYPE_FINGER
  • 1 - constants.TOUCHTYPE_PEN
  • 2 - constants.TOUCHTYPE_MOUSE
  • translationX and translationY [number] : cumulative distance as number. (Applicable only for PAN gesture type)

context table has the following key-value pairs:

  • rowIndex [number] : row index of the segui where gesture was recognised. (Applicable to gestures added to segUI rows)
  • sectionIndex [number] : section index of the segui where gesture was recognised. (Applicable to gestures added to segUI rows)

It is not recommend to define gestures for widgets that have a default behavior associated with it.

If you click (tap) a button (any clickable widget), the default behavior is to trigger an onClick event. If you define a Tap gesture on such widgets, the gesture closure is executed in addition to the onClick event.

If you swipe a larger form, the default behavior is to scroll up and down depending on the direction in which you swipe. If you define a SWIPE gesture on such forms, the gesture closure gets executed in addition to scrolling the form.

If you swipe a Segmented UI with huge number of rows, the default behavior is to scroll the Segmented UI. If you define a SWIPE gesture on such segments, the gesture closure gets executed in addition to scrolling the form.

Gestures can be added only for the following widgets:

  • Flex Container

  • Flex Scroll Container.

In the android platform, the top and bottom gestures work only when the scrolling is disabled for Form and parent scrolling containers. By default, the scrolling is enabled for the Form and scrolling containers.

  • ROTATION is not supported on android.

Example

 

//Sample code to add Gestures to the frmGestures FlexForm.
//Code to add DOUBLE TAP gesture to the frmGestures, FlexForm.
var doubletp = {
 fingers: 1,
 taps: 2
};
frmGestures.addGestureRecognizer(1, doubletp, onGestureFunction);
//Code to add SINGLE TAP gesture to the frmGestures FlexForm.
var singleTp = {
 fingers: 1,
 taps: 1
};
frmGestures.addGestureRecognizer(1, singleTp, onGestureFunction);
//Code to add SWIPE gesture to the frmGestures FlexForm.
var swipeForm = {
 fingers: 1,
 swipedistance: 50,
 swipevelocity: 75
};
frmGestures.addGestureRecognizer(2, swipeForm, onGestureFunction);
//Code to add LONGPRESS gesture to the frmGestures FlexForm.
var longPressForm = {
 pressDuration: 2
};
frmGestures.addGestureRecognizer(3, longPressForm, onGestureFunction);

function onGestureFunction(commonWidget, gestureInfo) {
 kony.print("The Gesture type is:" + gestureInfo.gestureType);

}

Platform Availability

  • iOS

Applies an animation to the widget.

Syntax

animate (animationObj, animateConfig, animationCallbacks)

Parameters

animationObj

An animation object created using kony.ui.createAnimation function.

animationConfig

As defined in widget level animation section.

animationCallbacks

A JavaScript dictionary that contains key-value pairs. The following keys are supported.

Key Description
animationEnd A JavaScript function that is invoked with the animation ends. For more information, see the Remarks section below.
animationStart A JavaScript function that is invoked with the animation starts. For more information, see the Remarks section below.

Return Values

Returns a platform-specific handle to the animation. This handle currently not used, but is returned for possible future requirements use.

Remarks

The callback for the animationStart key in the JavaScript object passed in this method's animationCallbacks parameter has the following signature.

animationStart(source, animationHandle, elapsedTime);

Where source is the widget being animated, animationHandle is the handle returned by the applyAnimation method, and elapsedTime is the amount of time the animation has been running in seconds, when this event is fired..

This event occurs at the start of the animation. If there is 'animation-delay' configured then this event will fire only after the delay period. This event gets called asynchronously.

The callback for the animationEnd key in the JavaScript object passed in this method's animationCallbacks parameter has the following signature.

animationEnd(source, animationHandle, elapsedTime);

Where source is the widget being animated, animationHandle is the handle returned by the applyAnimation method, and elapsedTime is the amount of time the animation has been running in seconds, when this event is fired.

This event occurs at the end of the animation. This event gets called asynchronously.

The animate method throws an Invalid Animation Definition Exception if animation definition, does not follow the dictionary structure expected. This method is ignored if it is called on a widget whose immediate parent is not FlexContainer or a FlexScrollContainer.

If the widget is not part of the currently visible view hierarchy, calling this method does nothing. Because this method is asynchronous and immediately returns, it does not wait for the animation to start or complete.

Example



//Sample code of animation
function AnimateBoth() {
    var getFuncName = frm1.listbox18.selectedKey;
    if (getFuncName == "BothLT") {
        frm1.textbox26.animate(myAnimDefinition(),
            animConfiguration(), {});
    } else if (getFuncName == "BothTBL") {
        frm1.textbox26.animate(myAnimDefinitionsc1(),
            animConfiguration(), {});
    }
}

Platform Availability

  • iOS
  • Android

This method specifies whether the browser can navigate back into history.

Syntax

canGoBack()

Return Values

status

True - if the browser cache is not empty.

False - if the browser cache is empty.

Remarks

If the browser cache is empty then this method returns false and the goBack method has no effect.

Example



//Sample code to invoke canGoBack method for a Browser widget.
var canGoBck = frmBrowser.myBrowser.canGoBack();
alert("canGoBack?::" + canGoBck);

Platform Availability

Available on all platforms.

This method specifies whether the browser can navigate forward into history.

Syntax

canGoForward()

Return Values

status

True - if the browser cache is not empty.

False - if the browser cache is empty.

Remarks

If the browser cache is empty then this method returns false and goForward method has no effect.

Example



//Sample code to invoke canGoForward method for a Browser widget.
var canGoFwd = frmBrowser.myBrowser.canGoForward();
alert("canGoForward?::" + canGoFwd);

Platform Availability

Available on all platforms.

In the iOS platform, when the Browser widget uses WKWebView engine to load data, a separate cookie storage area (called WKHTTPCookieStore) is created. This storage area is not connected to the parent app.
To sync the cookies in the WKHTTPCookieStore with the parent app, you must use the getCookies, setCookies and clearCookies methods of the Browser widget.

The clearCookies method is an asynchronous method that helps you to delete the cookies from the cookie storage area of the parent app.

Syntax

clearCookies(deleteCookieCallback,cookiesToDelete)

Input Parameters

cookiesToDelete: This parameter is used to input the name of the cookies that is to be deleted from the cookie storage of the parent app. This means that you must provide the key, Name to identify the cookies to be deleted from the storage.

deleteCookieCallback: This parameter registers the function that is invoked when the cookie is deleted from the cookie storage of the parent app. This callback is invoked for each cookie that is deleted. This function has the following two arguments.

  • wdg: This argument has the handle of with the Browser widget instance that invokes the clearCookies method.
  • cookieObject: This argument has the cookie object that is deleted using the clearCookies method.

Here is an example of the cookie object.

{
        "Name": "appName",
        "Value": "App01",
        "Domain": "app.example.com"
}

Example



//Sample code to invoke the clearCookies method for a Browser widget.

var listOfCookies = [{
 "Name": "appName"
}, {
 "Name": "ap"
}];
frmBrowser.myBrowser.clearCookies(clearCookiesCallback, listOfCookies);
function clearCookiesCallback(wdg, cookieObject) {
 kony.print(wdg, cookieObject);
}

Platform Availability

  • iOS 11 and onwards

This method clears the page history of the specified Browser.

Syntax

clearHistory()

Example



//Sample code to invoke clearHistory method for a Browser widget.
frmBrowser.myBrowser.clearHistory ();

Platform Availability

Available on all platforms except iPhone

When this method is used on a container widget, then all the widgets inside the container are cloned. This method takes an optional parameter. If the widgetid is not passed then the cloned copy will have the same ID as original widget.

If the widget ID is passed as a parameter then it will be prefixed to the existing ID and will assign it to cloned copy of the container. For all other widgets of the container and its child widgets.

For example, if the widget ID is "fc1" and the widget ID passed to clone API is "ref1", then the cloned widget ID will be "ref1fc1". For a child widget placed in a container with widget ID as "wid1", the cloned copy will have the widget ID as "ref1wid1".

Exceptions are not displayed if widget ID parameter is not unique. Instead when the cloned copy is added to the same form as of original container then it may lead to unexpected behaviors. So it is your responsibility to provide unique widget ID.

Syntax

clone()

Parameters

widgetId [String]

Optional. Reference of the name of the widget.

Return Values

Cloned copy of the widget.

Exceptions

None

Remarks

  • This method is not supported on SegmentedUI2 widget.
  • Gestures for the FlexContainer are not cloned. You have to reapply the gestures on the cloned object.
  • In Android platform, cloned Map widget will not work if prefix is not passed as parameter to the API.
  • To apply focusSkin for dynamically created widgets or cloned widgets, assign focusSkin dynamically after adding the widget to the form hierarchy. This is applicable for Desktop web platform. 
    formid.widgetid.focusSkin = "skinname";
  • To apply hoverSkin for dynamically created widgets or cloned widgets, assign hoverSkin dynamically after adding the widget to the form hierarchy. This is applicable for the Desktop web platform. 
    formid.widgetid.hoverSkin = "skinname";

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the clone Method for a FlexContainer widget.
//You need to make a corresponding call of the clone method for other applicable widgets.
var flex2 = frmFlex.flexContainer1.clone();
//Here, flexContainer1 is a FlexContainer widget that is already present in frmFlex FlexForm.
frmFlex.add(flex2);
//For instance, the corresponding clone method call on the Label widget is as follows:
var myLabel=frmFlex.lbl1.clone();

Platform Availability

  • iOS
  • Android

This method allows you to convert the coordinate system from a widget to a point (receiver's coordinate system).

Syntax

convertPointFromWidget(point, fromWidget)

Parameters

point

[JSObject]- Mandatory

You can specify an object with keys as x and y. You can specify the values in all (dp, px and %) units of measurement.

fromWidget

[widgetref]- Mandatory

This parameter is the handle to the widget instance. Based on this parameter, the coordinate system is converted from the widget to a point (receiver's coordinate system).

Example

Form1.widget1.convertPointFromWidget({
    x: "10dp",
    y: "20dp"
}, widget2);

Platform Availability

  • Android
  • iOS

Using the convertPointToWidget method, you can modify the co-ordinate system. You can convert the receiver's co-ordinate system from a point to a Widget.

Syntax

convertPointToWidget(point, toWidget)

Parameters

point

[JSObject]- Mandatory. You can specify an object with keys as x and y. You can specify the values in all (dp, px and %) units of measurement.

toWidget

[widgetref] - Mandatory. This parameter is the handle to the widget instance. Based on this parameter, the coordinate system is converted from a point to a widget.

Example

Form1.widget2.convertPointToWidget({
    x: "20dp",
    y: "30dp"
}, widget1);

Platform Availability

  • iOS
  • Android

This method accepts a JavaScript snippet in the form of a string.

Syntax

evaluateJavaScript(snippet)

Parameters

snippet

The contents of the JavaScript code.

Return Values

Returns the output or generates KonyError.

Following are platform-specific return values in various scenarios:

Scenario Android iOS
If there is any error in evaluating the JavaScript Null Null
If return is used (outside any defined function) Null Null
If return type is string Works fine Works fine
If return type is non-string Works fine Works fine

Remarks

This method evaluates the snippet and returns the result as a string.

This method returns null in case the result of the evaluation string is empty. When multiple functions are called in the JavaScript snippet, the returns of this method are based on the native platform behavior.

Following are the platform limitations:

iOS

  • The evaluateJavaScript method must be invoked on the webView instance only after the widget is loaded with the given URL or the HTML string. You can use the events onSuccess or onFailure on the webView to check if the URL is loaded.
  • This method returns null if there are any JavaScript evaluation errors. It throws exceptions in the following cases:
    • If the JavaScript string specified is more than 10MB.
    • If the JavaScript is taking more than 10 seconds to execute.
  • If return is used (outside and defined function) in the JavaScript snippet to be evaluated, then this method it returns null and does not throw any error.
    

//Example1 returns null.
webWidget1.evaluateJavaScript("return document.title");

//Example2 returns the document.title of the web page loaded.
webWidget1.evaluateJavaScript("document.title");

//Example3 If the script loaded in the webWidget1 is a var a = "100"; then calling:
webWidget1.evaluateJavaScript("a"); //It returns "100"
webWidget1.evaluateJavaScript("return a"); //returns null.

Android

  • The evaluateJavaScript API implementation internally relies on native Android WebView's method, addJavascriptInterface, on devices with API level less than 19 (that is, Android version earlier than 4.4). As there is security risk using the addjavascriptInterface API, by default, the evaluateJavaScript method is disabled under following conditions, where the usage of this API is vulnerable.
    • If application is running on devices with API level less than 17 (that is, Android version earlier than 4.2)
    • When application is compiled with target SDK less than 17 and when running on devices with API level less than 19.

    For more information on security risk associated in using the addJavascriptInterface method, refer http://developer.Android.com/reference/Android/webkit/WebView.html#addJavascriptinterface(java.land.Object,java.land.String)

    InOrder to explicitly enable the evaluateJavaScript method in all cases, set the enableJsInterface writable JS property on the Browser Widget to true.

    NOTE: It is Quantum Visualizer application developer's responsibility to judiciously use the evaluateJavaScript API along with enableJsInterface flag.

  • The evaluateJavaScript API implementation internally relies on native Android WebView's method, addJavascriptInterface on devices with API level less than 19 (that is, Android version earlier than 4.4). As there is security risk using the addjavascriptInterface API, by default, evaluateJavaScript method is disabled under following conditions, where the usage this API is vulnerable.
    • If application is running on devices with API level less than 17 (that is , Android version earlier than 4.2)
    • When application is compiled with target SDK less than 17 and when running on devices with API level less than 19.

    For more information on security risk associated in using the addJavascriptInterface method, refer http://developer.Android.com/reference/Android/webkit/WebView.html#addJavascriptinterface(java.land.Object,java.land.String)

    InOrder to explicitly enable the evaluateJavaScript method in all cases, set the enableJsInterface writable JS property on the Browser Widget to true.

    It is Quantum Visualizer application developer's responsibility to judiciously use the evaluateJavaScript API along with enableJsInterface flag.

  • There is a security risk for using this method in versions earlier than 4.2 devices for all targets, and 4.2 and 4.3 devices with target less than 17. This method is disabled in those versions. For more information, refer to http://developer.Android.com/reference/Android/webkit/WebView.html#addJavascriptinterface(java.land.Object,java.land.String).
    To enable this method,  set the "enableJsInterface" property for the browser widget. 
    If you are creating the widget through IDE, you should set this property in preShow of the Form.

    //Example1 webWidget1.enableJsInterface = true;

    If you are creating the widget dynamically, you should set this property immediately after the constructor.

    
//Example2
var webWidget1 = new kony.ui.Browser();
webWidget1.enableJsInterface = true;

    Due to technical limitations in the devices with OS versions earlier than 4.4 , this method waits for 3,500 milliseconds for the result and returns null if the execution exceeds that time.

    This method must be invoked on the webView instance only after it is loaded with the given URL or the HTML string. Use the events onSuccess or onFailure on the webView to check if the URL is loaded.

    This method returns null if there are any JavaScript evaluation errors and run-time exceptions. To handle run-time exceptions you must keep the script in try catch block and return the error string from catch so that this method returns the error string. For example: 

    

var result = webWidget1.evaluateJavaScript("function() {try {//Write your JS code here} catch (err) {return 'ERROR';}}");
if (result == "ERROR") {
 kony.print("Unknown Error");
} else {
 kony.print("Result:" + result);
}
  • If  return is used (outside and defined function) in the JavaScript snippet to be evaluated, then this method returns null and does not throw any error. 
    //Example1 returns null.
webWidget1.evaluateJavaScript("return document.title");

//Example2 returns the document.title of the web page loaded.
webWidget1.evaluateJavaScript("document.title");

//Example3 If the script loaded in the webWidget1 is a var a = "100"; then calling-
webWidget1.evaluateJavaScript("a"); //It returns "100"
webWidget1.evaluateJavaScript("return a"); //returns null.
    //Example1 returns null.
webWidget1.evaluateJavaScript("return document.title");

//Example2 returns the document.title of the web page loaded.
webWidget1.evaluateJavaScript("document.title");

//Example3 If the script loaded in the webWidget1 is a var a = "100"; then calling-
webWidget1.evaluateJavaScript("a"); //It returns "100"
webWidget1.evaluateJavaScript("return a"); //returns null.

Example

//Example1 
var result = webWidget1.evaluateJavaScript("JSON.stringify(eval(2+3))");
kony.print("Result:" + result);

//Example2 
var functionString = "function f(){var a = 5;	a += 10;}";
var result = webWidget1.evaluateJavaScript(functionString);

kony.print("Result: " + result);

//Example3
var functionString = "function f(){var a = 5;	a += 10;}";
try {
    var result = webWidget1.evaluateJavaScript(functionString);
    kony.print(" Result: " + result + " ; ");
} catch (e) {
    kony.print("Error code: " + e.errorCode + "Message: " + e.message);
}

//output of example 3 Error code:106 Message: Unknown Error<<

Platform Availability

  • iOS
  • Android

This method accepts a JavaScript snippet and a callback function as inputs.

Syntax

evaluateJavaScriptAsync(snippet,callback)

Parameters

snippet

The contents of the JavaScript code.

callback

function (result, konyError ){

};

The contents of the konyError are:

  • errorCode
  • name
  • message

Return Values

Returns the output or generates KonyError.

Remarks

This method evaluates the snippet and invokes the callback with the result.

On Android platform, this method accepts a JavaScript snippet in the form of string, and a callback function as inputs and evaluates the snippet and calls the callback with the result and error as null.

Following are the platform limitations:

iOS

  • This method returns null if there are any JavaScript evaluation errors. This method throws exceptions in the following cases:
    • If the JavaScript string specified is more than 10MB.
    • If the JavaScript is taking more than 10 seconds to execute.
  • Invoking alert ( ) from evaluateJavaScriptAsync method will hang the application. This is a technical limitation in iOS.
  • If return is used (outside and defined function) in the JavaScript snippet to be evaluated, this method returns null and does not throw any error.

Android

  • There is a security risk for using this method in versions earlier than 4.2 devices for all targets, and 4.2 and 4.3 devices with target less than 17. This method is disabled in those versions. For more information, refer to http://developer.Android.com/reference/Android/webkit/WebView.html#addJavascriptinterface(java.land.Object,java.land.String).
    To enable this method, set the "enableJsInterface" property for the browser widget. 
    If you are creating the widget through IDE, you should set this property in preShow of the Form.
  • Due to technical limitations in devices with OS earlier than 4.4, this method waits for 3,500 milliseconds for the result and returns null if the execution exceeds that time.
  • This method returns null if there are any JavaScript evaluation errors and run-time exceptions. To handle run-time exceptions, you must keep the script in a try catch block and return the error string from catch so that this method returns the error string.

Example

//Example1
webWidget1.evaluateJavaScriptAsync("eval(2+3)",
    function(result, error) {
        kony.print("Result:" + result);
    });

Platform Availability

  • iOS
  • Android

This API enables you to read the badge value (if any) attached to the specified widget. If the specified widget does not have a badge attached to it, it returns an empty string.

Syntax

getBadge()

Optional Parameter

uniqueIdentifier

Unique identifier of a widget which is a handle to the widget.

Return Values

Returns a string containing the badge value applied to the specified widget. If the specified widget has no badge value attached to it, it returns an empty string.

Remarks

  • When a badge is removed, the widgets are re-formatted to accommodate the cleared badge values.
  • On the iOS platform, this method is applicable on Label, Button, Image, TextBox, and TextArea widgets only.
  • For Android platform, this method is applicable on Button and Image widgets only.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the getBadge Method for button widget.
//You need to make a corresponding call of the getBadge method for other applicable widgets.
function getBadge() {
    //To get a badge value on a Button with ID btn1 placed on a form frm1, use the following snippet:
    var badgeVal = frm1.btn1.getBadge();
    alert("badge value is::" + badgeVal);

    //For instance, the corresponding getBadge method call on the Label widget is as follows:
    frm1.lbl1.getBadge();
}

Platform Availability

  • iOS

In the iOS platform, when the Browser widget uses WKWebView engine to load data, a separate cookie storage area (called WKHTTPCookieStore) is created. This storage area is not connected to the parent app.
To sync the cookies in the WKHTTPCookieStore with the parent app, you must use the getCookies, setCookies and clearCookies methods of the Browser widget.

The getCookies method is an asynchronous method that helps you to retrieve the cookies from the WKHTTPCookieStore to the parent app. The cookies will be available as an argument in the callback.

Syntax

getCookies(callback)

Input Parameters

callback: This parameter registers the function that is invoked when the cookie is being retrieved from the WKHTTPCookieStore. This function has the following two arguments.

  • wdg: This argument has the handle of with the Browser widget instance that invokes the getCookies method.
  • cookiesData: This argument has the list of all the cookies that is present in the WKHTTPCookieStore. Each cookie will be in the form of a dictionary with the values: Version, Name, Value, ExpiresDate, Domain and Path.
    Here is an example of a cookie.
    {
 "Version": 1,
 "Name": "user_id2",
 "Value": "ZD0265",
 "ExpiresDate": '(null)'//in milliseconds
 "Domain": "kite.zerodha.com",
 "Path": "/"
}

Example



//Sample code to invoke the getCookies method for a Browser widget.
frmBrowser.myBrowser.getCookies(getCookiesInfo);

function getCookiesInfo(wdg, cookiesdata)
{
    kony.print(cookiesdata);
}

Platform Availability

  • iOS 11 onwards.

Retrieves a list of the HTML files of the specified type.

Syntax

getHTMLFilesInWebFolder(RESTYPE)

Parameters

RESTYPE

The resource type of the files to be returned.

Return Values

Returns a list of files that match the resource type specified in the RESTYPE parameter.

This method provides you with the ability to navigate one step back in the browser history.

Syntax

goBack()

Remarks

If the history stack is empty then this method has no effect.

This method can be used only when canGoBack returns true.

Example



//Sample code to invoke goBack method for a Browser widget.
frmBrowser.myBrowser.goBack();

Platform Availability

  • iOS
  • Android
  • Desktop Web

This method provides you with the ability to navigate one step forward in the browser history.

Syntax

goForward()

Remarks

If there are no visited links in the history stack, then this method has no effect.

This method can be used only when canGoForward returns true.

Example



//Sample code to invoke goForward method for a Browser widget.
frmBrowser.myBrowser.goForward();

Platform Availability

  • iOS
  • Android
  • Desktop Web

Retrieves a Boolean value that indicates whether Apache Cordova apps are enabled.

Syntax

isCordovaAppsEnabled()

Parameters

None.

Return Values

Returns true if Cordova apps are enabled, or false if not.

Example 



//Sample code to invoke isCordovaAppsEnabled method for a Browser widget.
var status= frmBrowser.myBrowser.isCordovaAppsEnabled();
alert("Is Cordova Apps Enabled in the Browser widget?::" + status);
 

Retrieves a Boolean value that indicates whether your app can open an HTML preview.

Syntax

isHtmlPreviewEnabled()

Parameters

None.

Return Values

Returns true if the app can open an HTML preview and HTML code with a single click, or false if not.

Remarks

If this method returns true, the app can open both an HTML preview and the corresponding HTML code with a single click. If it returns false, a single click only opens the HTML code.

Example 



//Sample code to invoke isHtmlPreviewEnabled method for a Browser widget.
var status= frmBrowser.myBrowser.isHtmlPreviewEnabled();
alert("Is HTML Preview Enabled in the Browser widget?::" + status);
 

Retrieves a Boolean value indicating whether web app development is enabled in the app.

Syntax

isWebAppDevelopmentEnabled()

Parameters

None.

Return Values

Returns true if web app development is enabled, or false if not.

Remarks

Your app can use this value to enable or disable features depending on whether or not web app development is enabled.

Example



//Sample code to invoke isWebAppDevelopmentEnabled method for a Browser widget.
var status= frmBrowser.myBrowser.isWebAppDevelopmentEnabled();
alert("Is Web App Development Enabled in the Browser widget?::" + status);

This method enables you to load the data into the Browser with the provided configuration.

Syntax

loadData(data,dataConfig)

Parameters

data

The contents of the resource file or image that has to be loaded into the Browser. The contents should be raw bytes returned by the camera or kony.io.File API.

NOTE: On Android platform, only string is accepted. The string should be a base64 encoded image.

dataConfig

A configuration dictionary for the specified data. Following are the options:

  • mimeType: Optional. Specifies the mime type of the data. the default mime type is assumed as "text/html". For example, application/pdf, application/vnd.ms-powerpoint
  • encoding: Optional. Specifies the encoding to be used. The default encoding is UTF-8. For example, UTF-8 or UTF-16.
  • baseURL: Optional. The base URL for the content. The value is string specifying the file path.

On Android, you can use baseURL to access the application local web files (js/css). You can use baseURL to refer files stored in <project> -> web -> localfiles -> <user folder structure>
As shown in the following example, JavaScript files (.js files) are stored in <project> -> web -> localfiles -> js folder. With respect to the example in src attribute of <script> tag, you must provide the relative path (for example, js/ExampleJS1.js) and the base URL in the baseURL key of dataConfig object as "file:///android_asset/web/localfiles/".



var htmlString = "<html><head><title>Hello World Example</title>"
<script type= "text/javascript\" src=\"js/ExampleJS1.js\"></script>"
<script type="text/javascript \" src=\"js/index.js\"></script>"
<body><h1>Hello World !! </h1></body></html>";

/*An HTML String should always be written as a continuous line. Reformat the above code
to be in a single line.*/

var dataConfig ={"mimeType":"text/html","baseURL":"file:///android_asset/web/localfiles/"};
frmHome.brwWidget.loadData(htmlString,dataConfig);

Exceptions

  ERROR CODE Description
100 Invalid type of parameters
101 Invalid number of arguments

Remarks

Following are the guidelines and limitations of this method:

  1. This method should be called on the Browser widget from the post show of the form.
  2. In Android platform, data parameter of the loadData method accepts only a string parameter. All other parameter types are ignored. Following are the allowed formats for data parameter:
    • HTML content string
    • base64 image string
  3. On iPhone OS version 2.2.1 supports the following documents types:
    • Excel (.xls)
    • PDF (.pdf)
    • PowerPoint (.ppt)
    • Word (.doc)

NOTE: The document formats Excel, PowerPoint, and Word must be saved using Microsoft Office 97 or later versions.

Example



//Sample code to invoke loadData method in a Browser widget.
var pdfFile = kony.io.File(path/to/pdf/file);

var data = pdfFile.read();

var config = {
  	"mimeType":"application/pdf", 
       "encoding":"UTF-8"};

browserWidget.loadData(data,config);

Platform Availability

Available on all platforms except Desktop Web

Use this method to download files (such as PDF files) from the Browser widget present in a Form.

Syntax

registerFileDownloadCallback({“fileDownloadCallback”:<callbackFunction>})

Parameters

fileDownloadCallback

A JSON Object containing a key-value pair.
The key is fileDownloadCallback, and the value is a JavaScript callback function that must be invoked by Quantum Visualizer when the download request is complete.
The callback function contains the downloadStatus and downloadErrorReason parameters.

The downloadStatus parameter can have the following values depending on whether the file download is successful:

  • constants.BROWSER_DOWNLOAD_SUCCESSFUL
  • constants.BROWSER_DOWNLOAD_FAILURE

The downloadErrorReason parameter can have the following values:

  • constants.BROWSER_DOWNLOAD_ERROR_CANNOT_RESUME
  • constants.BROWSER_DOWNLOAD_ERROR_DEVICE_NOT_FOUND
  • constants.BROWSER_DOWNLOAD_ERROR_FILE_ALREADY_EXISTS
  • constants.BROWSER_DOWNLOAD_ERROR_FILE_ERROR
  • constants.BROWSER_DOWNLOAD_ERROR_HTTP_DATA_ERROR
  • constants.BROWSER_DOWNLOAD_ERROR_INSUFFICIENT_SPACE
  • constants.BROWSER_DOWNLOAD_ERROR_TOO_MANY_REDIRECTS
  • constants.BROWSER_DOWNLOAD_ERROR_UNHANDLED_HTTP_CODE
  • constants.BROWSER_DOWNLOAD_ERROR_UNKNOWN
  • constants.BROWSER_DOWNLOAD_ERROR_STORAGE_PERMISSION

Return Values

None

Remarks

  • The file is downloaded into the public Downloads folder of the device, by default.

    NOTE: You must provide external storage permissions in devices that use Android Target SDK versions below version 29.

  • Quantum Visualizer does not handle download notifications. The notifications are displayed based on the Download Manager Service and the Android System Notification Settings of the device.
  • Ensure that you do not invoke the registerFileDownloadCallback method in the pre-show event of the parent Form.
  • If the Browser widget is unable to render the content for display, the widget tries to download the content from the URL.
  • The Browser widget handler or the callbacks that are triggered during the rendering of a page do not work when the file is being downloaded.

Example



//Sample code to invoke the registerFileDownloadCallback method for a Browser widget.


var downloadConfigObject={"fileDownloadCallback":downloadCallback};
Form1.brwOne. registerFileDownloadCallback(downloadConfigObject);
function downloadCallback(jsonResponse) {
	alert("Status :: " + jsonResponse.downloadStatus);
alert("Reason :: " + jsonResponse.downloadErrorReason);
	if(jsonResponse.downloadStatus == constants.BROWSER_DOWNLOAD_SUCCESSFUL){
			kony.print("file downloaded successfully");
}
 }

Platform Availability

  • Android

This method registers a widget to enable 3D Touch peek and pop gestures.

Syntax

registerForPeekandPop(onPeekCallback, onPopCallback)

Parameters

onPeekCallback

A callback function that is invoked when the user slightly presses (soft press) the widget.

Callback Syntax

onPeekCallback(widget)

Callback Input Parameters

widget: A widget reference that is registered for peek and pop.

Callback Return Values

  A PreviewInfoTable. See the Remarks section for a description of this table.

Callback Example

function onPeekCallback(widget) {
    var previewInfoTable = {
        "peekForm": frmSecond,
        "focusRect": [0, 0, 200, 200],
        "contentSize": [320, 480]
    };
    return previewInfoTable;
}

onPopCallback (Optional)

A callback function that is invoked when the user further presses (hard press) the preview that is displayed for the widget.

Callback Syntax

onPopCallback(widget,peekForm)

Callback Input Parameters

widget: A widget reference that is registered for peek and pop.

peekForm: A form reference that is displayed as preview/peek.

Callback Return Values

 A form reference.

Callback Remarks

Use this callback to set the content for pop. The form handle returned by this callback is used for pop content. In general, the form that is used for preview is used for pop content also. If the pop callback is not implemented, peek disappears and the app returns to its previous state.

Callback Example

function onPopCallback(widget, peekForm) {
    // preview form used for pop also
    return peekForm;
}

Remarks

A PreviewInfoTable has the following format.

Name: peekForm

Description: The form reference that will be displayed as preview. If an invalid form reference is given, the preview will not be shown.

Type: form reference

Name: focusRect (Optional)

Description: An array representing a rectangle in widgets view coordinates. If provided, this rectangle will be focused while its surrounding area will be blurred, indicating a preview is available for the widget. If not provided, entire view area of the widget will be focused. If either the width or height is zero, the widget's view width/height is used. The values are supported in percentage(with regard to widget bounds), dp, or pixels. The values are strings. If a string value is given without any format specifier, it defaults to dp. If an array of numbers is given, it is assumed they are dp values.

Type: Array [x, y, width, height]

Example: [“0dp”, “0dp”, “200dp”, “300dp”], [“10%”, “10%”, “75%”, “50%”], [“10px”, “10px”, “200px”, “480px”]

 

Name: contentSize (Optional)

Description: An array representing the preferred content size of the preview. This allows the user to adjust the preferred width/height dimensions of the preview. If not provided, the preview is shown with default values. If either the width or height is zero, the default preview width/height is used. It is recommended that one of the width/height values be zero for proper adjustment of the other value. For example, if width = 0, the height is adjustable and vice versa. Providing positive values simultaneously for both width and height will result in distorted appearance of preview. The values are supported in dp, pixels, and percentage(with regard to screen bounds). The actual width/height of the preview may vary slightly due to resizing per aspect ratio. The values are strings. If a string value is given without any format specifier, it defaults to dp. If array of numbers is given, it is assumed they are dp values.

Type: Array [width, height]

Example: [“0dp”, “100dp”], [“100%”, “0%”], [“0px”, “240px”]

Example of a PreviewInfoTable:

var previewInfoTable = {
    "peekForm": frmSecond,
    "focusRect": [0, 0, 200, 200],
    "contentSize": [320, 480]
};

Return Values

None.

Platform Availability

  • iOS 9.0 and later

This method provides you with the ability to reload the current web page.

Syntax

reload()

Example



//Sample code to invoke reload method for a Browser widget.
frmBrowser.myBrowser.reload();

Platform Availability

  • iOS
  • Android
  • Desktop Web

This method allows you to remove a child widget from a parent widget.

Syntax

removeFromParent()

Read/Write

Yes - (Read and Write)

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the removeFromParent Method for a Calendar widget.
//You need to make a corresponding call of the removeFromParent method for other applicable widgets.

Form1.calendar.removeFromParent();

Platform Availability

  • iOS
  • Android
  • Responsive Web

This method allows you to remove the specified gesture recognizer for the specified widget.

Syntax

removeGestureRecognizer(gestureHandle)

Parameters

gestureHandle - Mandatory

Specifies the handle to the gesture returned by addGestureRecognizer call.

Example

 

//Sample code to remove Double tap gesture from frmGestures FlexForm.
frmGestures.removeGestureRecognizer(doubletp);

Platform Availability

  • Available on all platforms except Desktop Web and Android.

This method specifies the widget that must be active and brings the widget onto the viewport. Use this method to set the focus on widgets that cannot be brought into focus by using the setFocus method.

NOTE: For widgets that can be brought into focus by using the setFocus method, the behavior of this method is similar to the setFocus method. To set focus on widgets such as Label, FlexContainer, FlexScrollContainer, and others by using the setActive method, you must set the tabIndex attribute of the accessibilityConfig property.

When you use this method to set a widget as active, the activeStateSkin property and onFocus event configured for the widget are applied to it.
For the Segment and CollectionView widgets, you can specify the rows that need to be in focus by specifying the rowIndex and itemIndex as an input parameter respectively. If you do not specify an input parameter, the whole widget is set as active.

Syntax

setActive(rowIndex/itemIndex, sectionIndex, widgetPath)

Parameters

  • rowIndex [Number] - Optional: Specifies the index of the Segment row that must be in focus.
  • itemIndex [Number] - Optional: Specifies the index of the CollectionView item that must be in focus.
  • sectionIndex [Number] - Optional: Specifies the index of the Segment section that must be in focus.
  • widgetPath [String] - Optional: The widget path is a dot-seperated string that contains the path to the widget (present in a Segment row) from the root to the widget that must be in focus.

Return Values

None

Remarks

  • If a widget is disabled, it cannot be set as active.
  • You cannot set the child elements of a Segment, CollectionView, or DataGrid widget as active by using the setActive method.
  • The Web Framework provides support for both the setActive and the setFocus methods. However, Temenos recommends that you use only one of the methods for a widget.

  • If you set the onFocus Event for a widget that is set as active (by using the setActive method), ensure that you do not make any layout changes in the event callback of the onFocus Event to avoid UI glitches.
    For example, consider the following code:

    this.view.tb.onFocus = function(eventobject) {
    var lbl = new kony.ui.Label({id: "lblTest"});
    this.view.add(lbl);
    this.view.lblTest.text = 'onFocus Button';
    }.bind(this);

    //focus on the textbox present at the top of the form
    this.view.tb.setActive();

    When the setActive API is invoked on the TextBox widget, the TextBox is marked as active and made visible in the viewport. This makes the scrollbar scroll to the top of the Form where the TextBox widget is present. However, the creation of the Label widget in the callback of the onFocus Event changes the layout, making the scrollbar scroll back to the bottom of the form.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the setActive method for the FlexContainer and Segment
 widgets.
//You need to make a corresponding call of the setActive method for other applicable widgets.

//sample code to set the FlexContainer widget as active
this.view.flx.setActive();

//sample code to set focus on the button present within a component in the third row in first section of a Segment
this.view.seg.setActive(2,0,"CompWOC.btn1");

Platform Availability

  • Android
  • iOS
  • Responsive Web

This method enables you to set the badge value to the given widget at the upper, right corner of the widget.

Syntax

setBadge(badgeText)

Parameters

badgeText [String] - Mandatory

Specifies the Text value that appears within the badge. If the length of the badgeText is greater than 1, the badge is a rounded rectangle. For example, if you specify the text of the badge as 88, the number appears in a rounded rectangular badge. If the length of the badge text is 1, the badge is always a circle. The badge can occupy up to 70% of the width of the parent widget. For example, on a button with a width of 100 pixels, a badge with about 100 characters will occupy only 70 pixels of the button width. The badge text is truncated and shows about 30 characters followed by three dots.

skin [String] - Optional

The parameter specifies the background color for the badge. The default color is red.

Return Values

None

Exceptions

Error

Remarks

  • The color for the badge can be defined using a skin. The default color for the badge is red with white lettering.
  • If you pass an empty string as a parameter, the badge applied to the widget is cleared.
  • A Badge can be applied only to the FlexContainer Widget. To apply badge to other widgets, place the corresponding widget inside the FlexContainer, then apply Badge to the FlexContainer Widget. Also make sure that the clipBounds property of the FlexContainer are set to false.
  • If the badge value is a single character (a character or a number), the badge shape is a circle.

  • If the badge value contains multiple characters, the badge shape is a rectangle with rounded corners and borders.
  • The badge can occupy a maximum of 70% width of the parent widget (widget on which badge is applied). For example, on a button with a width of 100 pixels, a badge with about 100 characters will occupy only 70 pixels of the button width. The badge value is truncated and about 30 characters followed by three dots.
  • When a badge is set, the widgets are re-arranged to accommodate the badge.
  • For iOS platform, this method is applicable on Box, Label, and Image widgets only.
  • For Android platform, this method is applicable on Button and Image widgets only.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the setBadge Method for button widget.
//You need to make a corresponding call of the setBadge method for other applicable widgets.
function setBadge() {
    /*To set a badge value with skin "badgeSkin" on a button btn1
placed on a form frm1, use the following code: */
    frm1.btn1.setBadge("2", "badgeSkin");
}
//For instance, the corresponding setEnabled method call on the Label widget is as follows:
form.lbl1.setBadge("4", "badgeSkin");

Platform Availability

  • iOS

For more information about the badge APIs refer the API Reference Document.

In the iOS platform, when the Browser widget uses WKWebView engine to load data, a separate cookie storage area (called WKHTTPCookieStore) is created. This storage area is not connected to the parent app.
To sync the cookies in the WKHTTPCookieStore with the parent app, you must use the getCookies, setCookies and clearCookies methods of the Browser widget.

The setCookies method is an asynchronous method that helps you to set the cookies to the WKHTTPCookieStore from the parent app. The cookies will be available as an argument in the callback.

Syntax

setCookies(callback, cookiesData)

Input Parameters

cookiesData: This argument has the list of all the cookies that is present in the WKHTTPCookieStore. Each cookie will be in the form of a dictionary with the values: Version, Name, Value, ExpiresDate, Domain and Path.
Here is an example of a cookie.

{
 "Version": 1,
 "Name": "user_id2",
 "Value": "ZD0265",
 "ExpiresDate": '(null)'//in milliseconds
 "Domain": "kite.zerodha.com",
 "Path": "/"
}

callback: This parameter registers the function that is invoked when the cookie from the WKHTTPCookieStore is set in the cookie storage of the parent app. This function has the following two arguments.

  • wdg: This argument has the handle of with the Browser widget instance that invokes the setCookies method.
  • cookieObject: This argument has the handle of the object for which the setCookies method is invoked.

Remarks

  • If the cookie storage of the parent app already has a cookie with the same name, domain and path, the setCookie method will replace the existing cookie with the new one.
  • If the cookie to be stored in the cookie storage is new, ensure that you at least provide values of the following keys: Path, Name, Value and Domain. Also, all the valid key names must start with capital letters.

Example



//Sample code to invoke the setCookies method for a Browser widget.

var lisOfCookies = [{
 "Name": "appName",
 "Value": "App01",
 "Domain": "app.example.com",
 "Path": "/"
}];
frmBrowser.myBrowser.setCookies(setCookiesCallback, lisOfCookies);

function setCookiesCallback(wdg, cookieObject) {
 kony.print(cookieObject);
}

Platform Availability

iOS 11 and onwards

This method specifies the widget that must be enabled or disabled.

Syntax

setEnabled(enabled)

Parameters

enabled

[Boolean] - Mandatory

  • true -Indicates widget is enabled.
  • false - Indicates widget is disabled.

Return Values

None

Exceptions

Error

Remarks

  • This method is not applicable in Map widget.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the setEnabled Method for button widget.
//You need to make a corresponding call of the setEnabled method for other applicable widgets.

form1.myButton.setEnabled(false);

Platform Availability

Available on all platforms.

This method specifies the widget on which there must be in focus.

Default : true

Syntax

setFocus(focus)

Parameters

focus [Boolean]- Mandatory

  • true -Indicates focus is set on a widget.
  • false - Indicates focus is not set on a widget.

Return Values

None

Exceptions

Error

Remarks

  • You should not call this method in preShow of a form as it is not respected by all platforms. In android platform, this method is not respected in preShow of a form. You can give focus to a particular widget only after it is rendered on the screen, hence it should be called in postShow of a form.
  • This method is not applicable in Form widget.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to use the setFocus Method for button widget.
//You need to make a corresponding call of the setFocus method for other applicable widgets.

form1.myButton.setFocus(true);

Platform Availability

Available on all platforms.

This method allows you to set a gesture recognizer for a specified gesture for a specified widget. You can set a Gesture recognizer only for a FlexForm, a FlexContainer, and a FlexScrollContainer. The setGestureRecognizer method is deprecated and should not be used in new software. However, Swipe Distance and Swipe Velocity parameters are not deprecated. So if you want to use the Swipe Distance and Swipe velocity parameters, use the setGestureRecognizer method. To use all other parameters, you must use the addGestureRecognizer method.

Syntax

setGestureRecognizer (gestureType,setupParams,gestureHandler)

Parameters

gestureType

[Number] - Mandatory

Specifies the type of gesture that needs to be detected on the widget. The following are possible values:

  • 1 for TAP
  • 2 for SWIPE
  • 3 for LONGPRESS

setupParams

[array of arrays] - Mandatory

The parameter specifies an object that has the configuration parameters to setup a gesture recognizer. See Remarks for the values for this parameter.

gestureHandler

[function] - Mandatory

The parameter specifies the function that needs to be executed when a gesture is recognized. See Remarks for the functions syntax.

onGesturefunction(widgetRef,gestureInfo)

  • widgetRef - This parameter specifies the handle to the widget on which the gesture was recognized.
  • gestureInfo - This parameter specifies an array that provides information about the gesture. The contents of this array vary based on the gesture type.

Quantum Visualizer populates the details in the gestureInfo array. This array has the following key-value pairs:

  • gestureType [number] - indicates the gesture type; 1 for TAP, 2 for SWIPE, and 3 for LONGPRESS.
  • gesturesetUpParams [object] - this array is the set up parameters passed while adding the gesture recognizer.
  • gesturePosition [number] - indicates the position where the gesture was recognized. Possible values are: 1 for TOPLEFT, 2 for TOPCENTER, 3 for TOPRIGHT, 4 for MIDDLELEFT, 5 for MIDDLECENTER, 6 for MIDDLERIGHT, 7 for BOTTOMLEFT, 8 for BOTTOMCENTER, 9 for BOTTOMRIGHT, 10 for CENTER. This parameter is applicable only on iPhone.

  • swipeDirection [number] -indicates the direction of swipe. This parameter is applicable only if the gesture type is SWIPE. Possible values are: 1 for LEFT, 2 for RIGHT, 3 for TOP, 4 for BOTTOM.
  • gestureX [number] - specifies the X coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system. This parameter is applicable only on iPhone.
  • gestureY [number] - specifies the Y coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system. This parameter is applicable only on iPhone.
  • widgetWidth [number] - specifies the width of the widget (in pixels). This parameter is applicable only on iPhone.
  • widgetHeight [number] - specifies the height of the widget (in pixels). This parameter is applicable only on iPhone.

Return Values

String - Reference(uniqueidentifier) to the gesture is returned.

Exceptions

Error

Remarks

This method is applicable on Form, Box, and ScrollBox widgets only.

Configuration of setupParams

The configuration parameters vary based on the type of the gesture.

Gesture Type:TAP

  • fingers [number] - This parameter specifies the maximum number of fingers that must be respected for a gesture. Possible values are: 1. Default value is 1.
  • taps [number] - This parameter specifies the maximum number of taps that must be respected for a gesture. Possible values are: 1 or 2. Default value is 1.

For example: {fingers:1,taps:1}

Gesture Type:SWIPE

  • fingers [number] - This parameter specifies the maximum number of fingers that must be respected for a gesture. Possible values are: 1. Default value is 1.
  • swipedistance [number] - This parameter specifies the distance between the pixel from where the swipe started to the pixel where the swipe stopped (finger is moved up or removed). The default value is 50 pixels. This parameter is applicable only on android. This parameter is applicable only if the gesture type is SWIPE.
  • swipevelocity [number] - This parameter specifies the velocity of the swipe measured in pixels per second. The default value is 75. This parameter is applicable only on android. This parameter is applicable only if the gesture type is SWIPE.

For example: {fingers:1,swipedistance:50,swipevelocity:75}

Gesture Type:LONGPRESS

  • pressDuration [number] - This parameter specifies the minimum time interval (in seconds) after which the gesture is recognized as a LONGPRESS. For example, if the pressDuration is 2 seconds, any continued press is recognized as LONGPRESS only if it lasts for at least 2 seconds. Default value is 1. This parameter is not customizable on android platform. The default value on android platform is 500 ms. Any value you pass to this parameter is ignored and the default value is used.

For example: {pressDuration:1}

Function syntax for the GestureHandler parameter

The parameter specifies the function that needs to be executed when a gesture is recognized. This function has the following Syntax:

onGesturefunction(widgetRef,gestureInfo)

  • widgetRef - This parameter specifies the handle to the widget on which the gesture was recognized.
  • gestureInfo - This parameter specifies an array that provides information about the gesture. The contents of this array vary based on the gesture type.

Quantum Visualizer populates the details in the gestureInfo array. This array has the following key-value pairs:

  • gestureType [number] - indicates the gesture type; 1 for TAP, 2 for SWIPE, and 3 for LONGPRESS.
  • gesturesetUpParams [object] - this array is the set up parameters passed while adding the gesture recognizer.
  • gesturePosition [number] - indicates the position where the gesture was recognized. Possible values are: 1 for TOPLEFT, 2 for TOPCENTER, 3 for TOPRIGHT, 4 for MIDDLELEFT, 5 for MIDDLECENTER, 6 for MIDDLERIGHT, 7 for BOTTOMLEFT, 8 for BOTTOMCENTER, 9 for BOTTOMRIGHT, 10 for CENTER. This parameter is applicable only on iPhone.

  • swipeDirection [number] -indicates the direction of swipe. This parameter is applicable only if the gesture type is SWIPE. Possible values are: 1 for LEFT, 2 for RIGHT, 3 for TOP, 4 for BOTTOM.
  • gestureX [number] - specifies the X coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system. This parameter is applicable only on iPhone.
  • gestureY [number] - specifies the Y coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system. This parameter is applicable only on iPhone.
  • widgetWidth [number] - specifies the width of the widget (in pixels). This parameter is applicable only on iPhone.
  • widgetHeight [number] - specifies the height of the widget (in pixels). This parameter is applicable only on iPhone.

Example 



//The below function will get invoked  when a gesture is recognized. 
function myTap(myWidget, gestureInfo) {
    alert(" Tap Gesture detected");
    alert("gestureType :" + gestureInfo.gestureType);
    alert("gesturePosition :" + gestureInfo.gesturePosition);
    //write any further logic here
}

//Setting Gesture configuration.
var setupTblTap = {
    fingers: 1,
    taps: 2
}; //double tap gesture

//To add a TAP gesture recognizer on a hbox with ID hbx1 placed on a form frm1
var tapGesture = frm1.hbx1.setGgestureRecognizer(1, setupTblTap, myTap);

Platform Availability

  • iOS

This method sets and overrides the existing onPeekCallback for the widget.

Syntax

setOnPeek(onPeekCallback)

Parameters

onPeekCallback

A callback function that is invoked when the user slightly presses (soft press) the widget.

Callback Syntax

onPeekCallback(widget)

Callback Parameters

widget: A widget reference that is registered for peek and pop.

Callback Return Values

PreviewInfoTable. See the Remarks section for a description of this table.

Callback Example

function onPeekCallback(widget, contextInfo) {
    var previewInfoTable = {
        "peekForm": frmSecond,
        "focusRect": [0, 0, 200, 200],
        "contentSize": [320, 480]
    };
    return previewInfoTable;
}

Return Values

None.

Remarks

A PreviewInfoTable has the following format.

Name: peekForm

Description: The form reference that will be displayed as preview. If an invalid form reference is given, the preview will not be shown.

Type: form reference

Name: focusRect (Optional)

Description: An array representing a rectangle in widgets view coordinates. If provided, this rectangle will be focused while its surrounding area will be blurred, indicating a preview is available for the widget. If not provided, entire view area of the widget will be focused. If either the width or height is zero, the widget's view width/height is used. The values are supported in percentage(with regard to widget bounds), dp, or pixels. The values are strings. If a string value is given without any format specifier, it defaults to dp. If an array of numbers is given, it is assumed they are dp values.

Type:Array [x, y, width, height]

Example: [“0dp”, “0dp”, “200dp”, “300dp”], [“10%”, “10%”, “75%”, “50%”], [“10px”, “10px”, “200px”, “480px”]

Name:contentSize (Optional)

Description:An array representing the preferred content size of the preview. This allows the user to adjust the preferred width/height dimensions of the preview. If not provided, the preview is shown with default values. If either the width or height is zero, the default preview width/height is used. It is recommended that one of the width/height values be zero for proper adjustment of the other value. For example, if width = 0, the height is adjustable and vice versa. Providing positive values simultaneously for both width and height will result in distorted appearance of preview. The values are supported in dp, pixels, and percentage(with regard to screen bounds). The actual width/height of the preview may vary slightly due to resizing per aspect ratio. The values are strings. If a string value is given without any format specifier, it defaults to dp. If array of numbers is given, it is assumed they are dp values.

Type:Array [width, height]

Example: [“0dp”, “100dp”], [“100%”, “0%”], [“0px”, “240px”]

Example of a PreviewInfoTable:

var previewInfoTable = {
    "peekForm": frmSecond,
    "focusRect": [0, 0, 200, 200],
    "contentSize": [320, 480]
};

Example

function settingPeek() {
    Form1.setOnPeek(onMyPeekcallback);
}

function onMyPeekcallback(widgetref, contextInfo) {
    if (typeof(contextInfo) === undefined) {
        return null;
    }

    var previewInfoTable = {
        "peekForm": frmSecond,
        "focusRect": [0, 0, 200, 200],
        "contentSize": [320, 480]
    };
    return previewInfoTable;

}

Platform Availability

  • iOS 9.0 and later

This method overrides the existing onPopCallback for the widget.

Syntax

setOnPop(onPopCallback)

Parameters

onPopCallback

A callback function that is invoked when the user slightly presses (soft press) the widget.

Callback Syntax

onPopCallback(widget,peekForm)

Callback Parameters

widget: A widget reference that is registered for peek and pop.

peekForm

 A form reference that is displayed as preview/peek.

Callback Return Values

 A form reference.

Callback Remarks

 Use this callback to set the content for pop. The form handle returned by this callback is used for pop content. In general, the form that is used for preview is used for pop content also. If the pop callback is not implemented, peek disappears and the app returns to its previous state.

Callback Example

function onPopCallback(widget, peekForm) {
    // preview form used for pop also
    return peekForm;
}

Return Values

None.

Example

function settingPop() {
    Form1.setOnPop(myonPopcallback);
}

function myonPopcallback(widgetref, peekForm) {
    // preview form used for pop also
    return peekForm;
}

Platform Availability

  • iOS 9.0 and later

This method is used to set an action for a Browser widget, when the onSafeBrowsingHit event is triggered.

Syntax

setSafeBrowsingResponse(requestUrl, response, allowReporting)

Input Parameters

  • requestUrl [String]: This parameter specifies the URL for which the onSafeBrowsingHit event gets triggered. This is a mandatory attribute.
  • allowReporting[Boolean]: This flag depends on the value of the response attribute. This is a mandatory attribute.
  • response [Number]: This mandatory parameter specifies the action to be performed by a Browser widget when the URL specified in the requestUrl parameter is accessed. The following constants are applicable for the response parameter:
    • constants.BROWSER_SET_SAFEBROWSING_RESPONSE_SHOW_DEFAULT_INTERSTITIAL: Use this constant to display the default the interstitial page. If you set the allowReporting flag as true, the Automatically report details of possible security incidents to Google checkbox is displayed.
    • constants.BROWSER_SET_SAFEBROWSING_RESPONSE_PROCEED: When you use this constant, the Browser widget acts as if you have clicked the visit this unsafe site button. If you set the allowReporting flag as true, Safe Browsing reporting is enabled.
    • constants.BROWSER_SET_SAFEBROWSING_RESPONSE_BACKTOSAFETY: When you use this constant, the Browser widget acts as if you have clicked the Back to Safety button. If you set the allowReporting flag as true, Safe Browsing reporting is enabled.

Remarks

  • onSafeBrowsingHit event callback and the setSafeBrowsingResponse Method are used together to create a custom interstitial page when the Browser widget loads a flagged URL.

Example



/*Sample code to invoke setSafeBrowsingResponse method in Browser widget, when requestUrl triggers onSafeBrowsingHit event.*/
frm1.browserID.setSafeBrowsingResponse(requestUrl, constants.BROWSER_SET_SAFEBROWSING_RESPONSE_SHOW_DEFAULT_INTERSTITIAL, true);

Platform Availability

  • Android (API Level 27 and later)

Sets credentials that should be sent to the browser widget.

Syntax

setResponse (eventType,data)

Parameters

eventType [Integer]- Mandatory

The type of the event callback.

data[map]- Mandatory

The map contains credentials passed to the browser widget. See the Remarks section for more information.

Return Values

None

Remarks

If eventType is constants.WEBWIDGET_RECEIVE_TYPE_HTTP_AUTH’, the data object should consist of following sub parameters as key value pairs:

username[String] – Mandatory.

If username is given as empty string or is incorrect, the onReceive event is sent again.

password[String] – value in string format.

If password is given as empty string or is incorrect, the onReceive event is sent again.

For all other values it will display error page with status code 401.

Platform Availability

  • Android

Use this method to set the visibility of the widget.

Default : true

Syntax

setVisibility(visible)

Parameters

visible

[Boolean] - Mandatory

true -Indicates visibility is true.

false - Indicates visibility is false.

animationConfig

[JSObject] - Optional. The parameter specifies the animation configuration of the object. This is not supported in Desktop Web platform.

Following are the parameters of the JSObject:

animEffect

Optional. The parameter specifies the animation effect. Following are the available options of animation effect:

  • constants.ANIMATION_EFFECT_EXPAND: This is applicable when the visibility is turned on. Specifies the widget must expand gradually by increasing the height of the widget.
  • constants.ANIMATION_EFFECT_COLLAPSE: This is applicable when the visibility is turned off. Specifies the widget must collapse gradually by decreasing the height of the widget.
  • constants.ANIMATION_EFFECT_REVEAL: This is applicable when the visibility is turned on. Specifies the widget must appear gradually by decreasing the transparency of the widget.
  • constants.ANIMATION_EFFECT_FADE: This is applicable when the visibility is turned off. Specifies the widget must disappear gradually by increasing the transparency of the widget.
  • constants.ANIMATION_EFFECT_NONE: This is the default option. Specifies animation should not be applied to the widget. However the layout animations are applied on the Form.

animDuration

Optional. The parameter specifies the duration of the animation effect in seconds. The default value is 1 second. The negative values are ignored and defaulted to 1 second.

animDelay

Optional. This parameter specifies the delay of the animation effect in seconds. The default value is 0 second. The negative values are ignored and defaulted to 0 second.

animCurve

Optional. The parameter specifies the animation curve to be applied while playing the animation. An animation curve defines the speed of the animations at different intervals of the animation duration. Following are the available options of animation curve:

  • constants.ANIMATION_CURVE_EASEIN: Specifies the animation effect to start slow in the beginning.
  • constants.ANIMATION_CURVE_EASEOUT: Specifies the animation effect to slowdown towards the end.
  • constants.ANIMATION_CURVE_EASEINOUT: Specifies the animation effect to start slow and slowdown towards the end.
  • constants.ANIMATION_CURVE_LINEAR: This is the default value. Specifies the animation effect to continue with the same speed from start to end.

animCallBacks - Optional

It is a JS dictionary containing the events invoked by the platform during the animation life cycle. Following are the available events:

  • animStarted: Invoked at the beginning of the animation without any parameters. Following is the Syntax of the event: function animStarted()
  • animEnded: Invoked at the end of the animation without any parameters. Following is the Syntax of the event: function animEnded()

Return Values

None

Exceptions

Error

Remarks

  • This method is not applicable on Form, Popup, and Alert. It is also not applicable if the widget is placed in a Segment. When the widget is placed in a Segment, the default Visibility is set to true. If you want to change the value to false, you can do so by using Segment methods.
  • Passing an invalid type other than the above events lead to run time exceptions/ crashes.
  • This method is not supported on the widgets FlexForm, FlexContainer, and FlexScrollContainer.

Example



//This is a generic method that is applicable for various widgets.
//Here, we have shown how to invoke the setVisibility Method for a button widget with animation.
//You need to make a corresponding call of the setVisibility method for other applicable widgets.

form1.myButton.setVisibility(
    false, {
        "animEffect": constants.ANIMATION_EFFECT_COLLAPSE,
        "animDuration": 1,
        "animDelay": 0,
        "animCurve": constants.ANIMATION_CURVE_LINEAR,
        "animCallBacks": {
            "animStarted": startCallBackFunc,
            "animEnded": endCallBackFunc
        }
    });
//Sample code to invoke setVisibility Method for button widget without animation.
form1.myButton.setVisibility(false);

Platform Availability

Available on all platforms.

This method unregisters a widget from 3D Touch peek and pop gestures.

Syntax

unregisterForPeekandPop()

Parameters

None.

Return Values

None.

Example



Form1.unregisterForPeekAndPop();

Platform Availability

  • iOS 9.0 and later